Specifications
90 Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual
PRELIMINARY
Brightness and Contrast: Cinema Standards Measurement System (CSMS)
Specifications
- Brightness: 86.0 foot-Lamberts (fL) (VX-40d);
107.3 fL (VX-50d); 94 fL (VX-60d); 188.6 fL (VX-80d)
- Contrast Ratio (variable, based on lens aperture setting):
233:1 - 285:1 (VX-40d);
229:1 - 279:1 (VX-50d);
227:1 - 282:1 (VX-60d);
225:1 - 277:1 (VX-80d)
These measurements are taken from the projector in a controlled,
home theater environment. All measurements are made to
ANSI/NAPM IT7.228-1997 specifications using the Photo Research
PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter,
Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The
projector is calibrated to a color temperature of 6,500K and has a
minimum of 150 hours of usage.
The foot-Lambert (fL) is the unit of measurement used in commercial
movie theaters to express image brightness at the screen surface. The
Society of Motion Picture and Television Engineers (SMPTE) specifies
16 fL as the target image brightness for film-based projectors using an
open gate (without film in the projector). More importantly, today
SMPTE specifies 12 fL as the target image brightness in Digital
Cinema theaters. The foot-Lambert measurement is dependent on
screen size, screen gain and projector light output.
Home Theater Calibration Specifications
- Light Output:
2180 ANSI Lumens (VX-40d);
3462 ANSI Lumens (VX-50d);
2360 ANSI Lumens (VX-60d);
5740 ANSI Lumens (VX-80d)
- Contrast Ratio (variable, based on lens aperture setting):
233:1 - 285:1 (VX-40d);
229:1 - 279:1 (VX-50d);
227:1 - 282:1 (VX-60d);
225:1 - 277:1 (VX-80d)
These specifications are obtained by calibrating the projector as
described above for CSMS measurements.
Industry-Standard Specifications
- Light Output:
4000 ANSI Lumens (VX-40d and VX-60d);
6000 ANSI Lumens (VX-50d);
8000 ANSI Lumens (VX-80d)
- Contrast Ratio (variable, based on lens aperture setting):
1500 - 2000:1
These are typical projector brightness and contrast specifications
found in most companies’ sales literature. Runco includes these
measurements in its literature to allow for direct comparison with other
manufacturers’ projectors. These measurements are typically taken at
9,000K to 13,000K to get expected performance data when the
projector is used in professional, commercial and industrial displays.
Power Requirements: VX-40d/-60d:
100 to 240 VAC (auto-sensing), 50/60 Hz, 1,700 Watts
VX-50d/-80d:
200 to 240 VAC (auto-sensing), 50/60 Hz, 2,100 Watts
Operating Environment: 41°F to 95°F (5°C to 35°C), 20% to 80% humidity
(non-condensing)
Table 7-1. VX-40d/-50d/-60d/-80d Specifications (continued)