Installing for Windows 2000 professional

3.3Installing for Windows 2000 professional

For Windows 2000 professional, the installation of the SAGEM F@stTM 1000 modem is carried out according to the following process :

!Installing the modem drivers,

!Configuring the ATM settings.

!Switch off the modem if it is powered by unplugging the power supply cable either on the modem side (connector marked PWR), or on the mains side.

!Switch on the PC and wait for the complete start-up of Windows 2000.

!Insert the installation CD-ROM; the home page appears after a few seconds.

If this screen does not appear automatically proceed as follows:

From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.

!Select Modem setup on this page.

The install program copies the files to the PC's hard drive, then displays the following message:

!Click OK and connect the modem to the PC with the USB cable, and to the telephone line (ADSL) with the line cable.

!Connect the power supply cable to the modem (connector marked PWR), then connect the mains adapter to power up the SAGEM F@stTM 1000.

Windows installs the drivers then displays the following message:

No reproduction or communication without the written consent of SAGEM SA

Page 3-17