Installing for Windows Millennium | Sagem N56815740110 guide

3.4Installing for Windows Millennium

For Windows Millennium, installation of the SAGEM F@stTM 1000 modem is carried out according to the following process:

!Installing the modem drivers,

!Configuring a new dial-up connection.

!Switch off the modem if it is powered by unplugging the power supply cable either on the modem side (connector marked PWR), or on the mains side.

!Switch on the PC and wait for the complete startup of Windows ME.

!Insert the installation CD-ROM; the welcome page appears after a few seconds.

If this screen does not appear automatically proceed as follows:

From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.

!Select Modem setup on this page. The following screen appears:

The install program copies the files necessary for the installation onto the PC's hard drive.

!Make the modem connections when the application prompts you.

!Connect the modem to the PC with the USB cable, and to the telephone line (ADSL) with the line cable.

!Connect the power supply cable to the modem (connector marked PWR), then connect the mains adapter to power up the SAGEM F@stTM 1000.

After connecting the modem, the PC installs the drivers ADSLBOOT, VVBusUSB and VVBATM.

Page 3-28No reproduction or communication without the written consent of SAGEM SA