3 - Installing the SAGEM F@stTM 1000 modem
User Guide - N56815740110
No reproduction or communication without the written consent of SAGEM SA Page 3-33
! Choose the options:
In Quality Of Service:
Type: Unspecified Bit Rate,
Rate: Line Rate.
In Circuit Type:
Permanent virtual circuit: Virtual Path Identifier (VPI) 5 and Virtua l Circuit Identifier (VCI) 3,
Framing: Logical Link Control.
! Then click OK, and Next.
! Enter any area code and any phone number.
! Click Next, then Finish.
On the icon for the newly created connection:
! Right-click and choose Properties.
! Select the Networking tab.
! Choose the options:
In Advanced options:
- disable software compression.
In Allowed network protocols:
- disable the protocols NetBEUI and IPX/SPX,
- enable the protocol TCP/IP.
5