SETTING UP SHOOTING FUNCTION
Shooting Function details using LCD panel indicator
Select the Flash mode
Four different flash modes can be selected using the SELECT button. The mode will be shown in the camera status LCD.
Use the correct flash to suit the environment.
Flash mode indicator
Auto Flash : If the object that is being photographed is too dark, the camera flash will work automatically.
BASIC
Auto Flash and
Fill-in Flash
Flash off
:The flash will work automatically if there is not enough light. The problem of red eye will also be reduced.
:If the background behind the object is very bright, fill in flash will safeguard against that object appearing too dark in the photo. The result should be an acceptable lighting balance.
:The flash is disabled.
Reference
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 7 seconds. If the batteries are weak, the charging time will be longer.
Note
Please photograph within the flash shot range(W: 0.2~3m. T:0.2~2m). The image is saturated when you take it with a strong reflector or at close range.
31
