The preset password on the LCD Display is "0000".
Note
• Resetting the password for the function key lock.
Press INFO → EXIT → MUTE. The password will b e reset to '0000'. The remote control is required for
resetting the password.
PC / BNC / DVI
TV
AV
S-Video
Component
DVI-Video
MagicNet
Note
• The operating system for this set only supports English so the other languages might be corrupted on the
screen.
• For MagicNet, a remote control is available for MagicNet. However, it is recommended using a separate
USB keyboard.
• For MagicNet with the Device mode, moving device surrounding while booting may cause errors. Set up
device surrounding only if LCD Display turns on or doing well.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicNet)
may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program
(MagicNet) may stop.
• To access other sources, press the SOURCE button in MagicNet.
• The preset password on the LCD Display is "000000".
• The server program's Power-On option works only if the LCD Display 's power is completely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process of shutting up
since it can possibly cause systemetic error on the LCD Display.
• In the OSD image of MagicNet, Network mode is the same as Device.
• When using MagicNet with the MagicNet Server Program: perform Network mode