Connecting to a TV 1) Connect the CATV or antenna coaxial cable to the Antenna terminal at the back of the LCD Display.
You need to use a coaxial antenna cable.
There are 3 ways to connect the D-sub to your LCD Display.
Choose one of the following:
•When using an interior antenna t erminal:
Check the antenna terminal on the wall first and connect the antenna cable.
•When using an outdoor antenna:
Use a professional for the installation, if possible.
•To connect the RF cable to the antenna input terminal:
Keep the copper wire portion of the RF cable straight.
2) Turn on the LCD Display.
3) Select TV usin g the Source button from among the external signal adjustment buttons.
4) Select a TV channel.
Note
• You may view television programs on the LCD Display if it is connected to an antenna or a CATV cable
without installing any separate TV reception hardware or software on your computer.
•Is a week signal causing poor reception?
Purchase and install a signal amplifier for better reception.
Note
• Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable.
• Then, start the DVD with a DVD disc inserted.
• Select Digital using the SOURCE button.
Note