Safety Instructions

Introduction

Connections

Installing the Stand Kit

Connecting the LCD

Display

Using the Software

Adjusting the LCD Display

Troubleshooting

Specifications

Information

Appendix

Select Language

Main Page

Model

SyncMaster 400TXn

The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement.

Connections

Installing the Stand Kit

Note

• Only the supplied bolts should be used.

Caution

Samsung Electronics will not be responsible for damages caused by using a base other than those specified.

Installing the Semi Stand

Left stand

Right stand

Caution

Make sure to install the stand with the Caution label folded backwards.

1)A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.

2)Set up the left and right stands respectively.

3)Insert the stand into the hole at the bottom of the LCD Display. Insert the screw into the hole indicated and tighten it. (M4 x L15)

Caution

Page 25
Image 25
Samsung 400TXn specifications Installing the Stand Kit, Installing the Semi Stand