Loading paper
In the tray 1
Load the print media you use for the majority of your print jobs in the tray 1. The tray 1 can hold a maximum of 150 sheets of 20 lb plain paper.
You can purchase an optional tray 2 and attach it below the tray 1 to load an additional 250 sheets of paper. For order information for an optional optional tray 2, see page 12.1.
Loading paper in the tray 1
1Pull the tray out of the machine.
2Open the paper cover.
3Adjust the size of tray until it sound click.
4Enlarge the tray by adjusting the paper width guide.
5Flex the paper sheets back and forth to separate pages and then fan them while holding one edge. Tap the edges of the stack on a flat surface to even it up.
6Load paper with the print side up.
Make sure not to overfill the tray and that all four corners are flat in the tray and under the brackets, as shown below. Overfilling the tray may cause a paper jam.
7Squeeze the paper length guide and slide in it until it lightly touches the end of the paper stack.
5.6 <Loading originals and print media>
