Samsung CLX-3160 Cancel?, Yes, Connection Error, Data Read Fail, Check USB Mem, Data Write Fail

Message	Meaning	Suggested solutions
	Stop/Clear has
[Stop Pressed]	been pressed during	Try again.
	an operation.
		To cancel the fax job,
		press the OK button
		to accept Yes.
	Your machine’s	If you want to send
		those pages that
Cancel?	memory has	have been
Yes	become full while	successfully stored,
	trying to store an	press the OK button
	original into memory.	to accept No. You
		should send the
		remaining pages
		later, when memory is
		available.
	Connection with the	Check the server
Connection Error		settings and the
	SMTP server failed.
		network cable.
Data Read Fail	Time expired while	Try again.
Check USB Mem.	reading data.
Data Write Fail	Storing to the USB	Check the available
Check USB Mem.	memory failed.	USB memory space.
		Unplug the power
Deve Home Sensor	There is a problem	cord and plug it back
		in. If the problem
Error	in the fuser unit.
		persists, please call
		for service.
	The loaded original	Clear the jam. See
Document Jam	has jammed in the
		page 14.1.
	ADF.
	The front cover or	Close the cover until it
Door Open	rear cover is not
		locks into place.
	securely latched.
Enter Again	You entered an	Enter the correct item
	unavailable item.	again.
File Format	The selected file	Use the correct file
	format is not
Not Supported		format.
	supported.
Fuser Fan	There is a problem	Open and then close
	in the cooling fan of
Locked		the front cover.
	the machine.

Message	Meaning	Suggested solutions
	You have tried to
	select a group
	location number	Use a speed dial
	where only a single
		number or dial a
Group Not	location number can
		number manually
Available	be used, such as
		using the number
	when adding
		keypad.
	locations for a
	Multiple Send
	operation.
Install	The color toner	Install the color toner
	cartridge is not
[Color] Toner		cartridge.
	installed.
Install	The corresponding	Install the part into
	part of the machine
[Part]		your machine.
	is not installed.
	The color toner	Install the a
		Samsung-genuine
Invalid	cartridge you have
		color toner cartridge
[Color] Toner	installed is not for
		designed for your
	your machine.
		machine.
	The color part of the	Install the a
Invalid		Samsung-genuine
	machine is not for
[Part]		part designed for your
	your machine.
		machine.
	The receiving fax
Line Busy	machine did not	Try again after a few
	answer or the line is	minutes.
	already engaged.
		Unplug the power
Low Heat Error	There is a problem	cord and plug it back
		in. If the problem
Cycle Power	in the fuser unit.
		persists, please call
		for service.
	A problem has	Unplug the power
LSU Hsync Error		cord and plug it back
	occurred in the LSU
		in. If the problem
Cycle Power	(Laser Scanning
		persists, please call
	Unit).
		for service.
	A problem has	Unplug the power
LSU Motor Error		cord and plug it back
	occurred in the LSU
		in. If the problem
Cycle Power	(Laser Scanning
		persists, please call
	Unit).
		for service.
Main Motor	There is a problem	Open and then close
Locked	in the main motor.	the front cover.

14.6 <Troubleshooting>