Connecting & Setting Up
English - 17

Case 3 : Component Video output jacks

1. Connect Component video cables(not supplied) between
the COMPONENT OUT(Y, PB, PR) jacks on DVD Recorder and
COMPONENT IN (Y, PB, PR) jacks on your TV.
2. Connect audio cables (white and red) between the AUDIO
OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or
AV ampli er).
(See page 17~18)
3. After connecting, refer to the page 28.
• You will enjoy high quality and accurate colour reproduction
images.
The Component jacks will not output video
resolutions above 576p.
To view 720p and 1080i connect the DVD Recorder to
your TV with the supplied HDMI cable.
With HDMI connected, press the P.SC A N button to
alternate between all available resolutions.
(See page 29)
Make sure that the colour coded connections match.
The Y, PB, PR component output jacks of your
DVD Recorder must be connected to the exact
corresponding component input jacks on your TV.
Progressive setting is only available when the Video
Out is set to Component.
(See page 29)
▌
■
■
■
Other type of connecting the Audio output cable
There are several ways to output audio signal .
Select the audio connection that best suits you below.
• Case 1 : Connecting to your TV
• Case 2 : Connecting to a stereo ampli er with AV output
jacks
• Case 3 : Connecting to an AV ampli er with a digital output
jack

Manufactured under licence from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.
▌
COMPONENT
Pr
Pb
Y
yellow
yellow
white
red
white
red
green
blue
red
green
blue
red
01274J-R150,155-AFR-ENG.indb 1701274J-R150,155-AFR-ENG.indb 17 2007-04-20 오후 2:27:382007-04-20 오후 2:27:38