Installing PS Drivers

PPDs, in combination with the PostScript driver, access the printer features and allow the computer to communicate with the printer. An installation programme for the PPDs is provided on the supplied software CD-ROM.

Before installing, make sure that the printer and the PC are properly connected with parallel, USB, or network interface. For information about:

connecting with the parallel interface, see page 2.11.

connecting with the USB interface, see page 2.12. For Windows 98/Me, the USB driver must be installed.

connecting with a network interface, see page 2.13.

Installing PS Drivers

PostScript Driver is installed when you select Custom and then Printer(PostScript) while installing the software. For details, see page 2.19.

If you select Typical while installing the software, you can install PS Driver as follows:

1From the Start menu, select Programs, Samsung ML- 2250 Series and then Maintenance.

Or Insert the supplied CD-ROM into the CD-ROM drive.

2Select Repair.

NOTE: If your machine is not connected to the computer, the following window will appear.

After connecting the machine, click Next.

If you want to skip the connection status, click Next, and No to the following screen.Then the installation will start and the test page will not be printed at the end of the installation.

B.2 USING WINDOWS POSTSCRIPT DRIVER

Page 151
Image 151
Samsung ML-2251NP manual Installing PS Drivers, Connecting with a network interface, see