7Tighten the two screws.

8Reconnect the power cord and printer cable, and turn the printer on.

NOTE: If you are using the printer as a PostScript device, you need to change the memory value in the printer properties as you have installed.

Removing the Memory DIMM

1Follow steps 1 through 3 on page E.3 to access the control board.

2Push the clips at each end of the connector slot away from the DIMM.

E

3Place the DIMM in its original packaging or wrap it with paper and store it in a box.

INSTALLING PRINTER OPTIONS E.5

Page 182
Image 182
Samsung ML-2251NP manual Removing the Memory Dimm