LED | Description |
|
|
If the On Line/Error and Toner Save LEDs blink, your system has some problem. To solve the problem, see “Troubleshooting Error Messages” on page 6.20.
Cancel button
1
Function | Description | |
|
| |
Printing demo page | In Ready mode, press and hold this button for about 2 | |
| seconds until all LEDs blink slowly, and release. | |
|
| |
Printing configuration | In Ready mode, press and hold this button for about 6 | |
seconds until all LEDs blink fast, and release. | ||
sheets | ||
A printer and network configuration sheets print out. | ||
| ||
|
| |
Network card Default | In Ready mode, press and hold this button for about | |
Setting | 20 seconds until all LEDs blink slowly, and release. | |
| This item restores the factory default of the network | |
| configuration. This setting will only take effect after | |
| you have reset the printer. | |
|
| |
Manual Feeding | Press this button each time you load paper in the | |
| ||
| Feed for Source from your software application. For | |
| detailed information, see “Using the Manual Feed | |
| Mode” on page 3.12. | |
|
| |
Cleaning inside printer | In Ready mode, press and hold this button for about | |
| 10 seconds until all LEDs turn on, and release. After | |
| cleaning the printer, one “cleaning sheet” (see | |
| page 5.7) is printed. | |
|
| |
Canceling print job | Press this button during printing. The On Line/Error | |
| LED blinks while the print job is cleared from both the | |
| printer and the computer, and then the printer returns | |
| to Ready mode. This may take some time depending | |
| on the size of the print job. | |
|
| |
Toner Save mode on/ | In Ready mode, press this button to turn the Toner | |
off | Save mode on or off. | |
| For detailed information, see “Using the Toner Save | |
| Mode” on page 4.9. | |
|
|
INTRODUCTION 1.7
