Using Multi-Monitor Mode
You may duplicate your LCD screen on an external monitor or television.
TV Connection Restrictions:
You should only connect/disconnect cables and wires to your computer and TV when the power is off.
TV Support Limitations:
The computer will only support televisions with S-VHS input capability. The
standard composite video in port is not supported. The TV-out port is not supported in DOS mode.
When TV-Out is activated, your computer screen will not be active.
To start using Multi-Monitor mode proceed as follows:
1. Connect the external monitor to the connection on the back of your computer.
2. Press the <Fn+F3> key combination, the LCD will be duplicated on the monitor or digital flat panel.
<Fn+F3> key combinations
Each time you use the <Fn+F3> key combination the LCD/Monitor
combination changes as follows:
• Monitor is displaying the computer output.
• Both displays (LCD & Monitor) are displaying the computer output.
• LCD only is displaying the computer output.
To stop using multi-monitor mode proceed as follows:
1. Press the <Fn+F3> key combination until only the LCD is displaying the computer output.
2. Disconnect the external monitor or television from the connection on the back of your computer.

Using Multi-Monitor Mode

Multi-Monitor mode is the basic display mode which displays same view on all the display devices connected to a system.

Using Multi-Monitor Mode

53