ProblemAction
Nothing appears on the external monitor when you switch the display to it.
Is the monitor properly connected to the computer? Is the monitor’s power cord connected to an AC wall outlet? Check the brightness and contrast controls on the monitor. Does the program appear on the LCD panel instead of the external monitor? If so, press <Fn+F3> to switch to the monitor. Try turning the monitor off and on again.
The LCD screen doesn’t fit | Case 1 - Dual Display mode |
the panel size (1024 X 768) | “Dual Display” mode does not support panel fitting. |
when playing games or using | Case 2 - LCD Only Display mode |
applications. | Enable the “Panel Fit” to fix this problem. |
| |
| 2.Select Graphics Options > Panel Fit > Enable. |
|
|
The external monitor | Check the cables between the monitor and the |
displays flashes or waves. | computer. Are they properly installed? |
|
|
Cannot toggle between CRT | If you are using the Multimonitor mode, you can not |
and LCD while playing 3D | use the <Fn+F3> key combination and also you |
games, MPEG files or DVD | cannot use this function in 3D games using |
files. | |
|
|
Cannot see display screen | First start in "Safe Mode" then restart Windows. It is |
after uninstalling the video | recommended that you reconnect the CRT and set to |
driver. | "CRT and LCD" before you uninstall the video |
| driver. Restart Windows and access the Recovery |
| Boot Menu by pressing the F8 key after the initial |
| Samsung splash screen. Select starting the system in |
| VGA mode. Reinstall the Video Driver. |
There is LCD or CRT has noise (speckles, lines or raged edges) on the picture when playing a MPEG file with the Media player/ DVD software or using the USB camera.
Adjust the resolution and the colour to 1024 x 768 and 32 bit to display clearly, or avoid playing two programs at the same time.
The screen is distorted when switching from windowed DOS screen to full DOS screen or entering Hibernate Mode.
1.
Troubleshooting 61