S3C8245/P8245/C8249/P8249 DEVELOPMENT TOOLS
22-5
Table 22-3. Device Selection Settings for TB8245/9
"To User_Vcc" Settings Operating Mode Comments
Device Selection
8245 8249
Target
System
TB8249
Operate with TB8249
Device Selection
8245 8249
Target
System
TB8245
Operate with TB8245
SMDS2+ SELECTION (SAM8)
In order to write data into program memory that is available in SMDS2+, the target board should be selected to be for
SMDS2+ through a switch as follows. Otherwise, the program memory writing function is not available.
Table 22-4. The SMDS2+ Tool Selection Setting
"SW1" Setting Operating Mode
SMDS2 SMDS2+
Target
System
R/W R/W
SMDS2+
IDLE LED
The Yellow LED is ON when the evaluation chip (S3E8240) is in idle mode.
STOP LED
The Red LED is ON when the evaluation chip (S3E8240) is in stop mode.