ADDRESSING MODES S3C8245/P8245/C8249/P8249
3-2
REGISTER ADDRESSING MODE (R)

In Register addressing mode (R), the operand value is the content of a specified register or register pair

(see Figure 3-1).

Working register addressing differs from Register addressing in that it uses a register pointer to specify an 8-byte

working register space in the register file and an 8-bit register within that space (see Figure 3-2).

dst
Value used in
Instruction Execution
OPCODE
OPERAND
8-bit Register
File Address
Point to One
Register in Register
File
One-Operand
Instruction
(Example)
Sample Instruction:
DEC CNTR ; Where CNTR is the label of an 8-bit register address
Program Memory Register File

Figure 3-1. Register Addressing

dst
OPCODE
4-bit
Working Register Point to the
Working Register
(1 of 8)
Two-Operand
Instruction
(Example)
Sample Instruction:
ADD R1, R2 ; Where R1 and R2 are registers in the currently
selected working register area.
Program Memory
Register File
src 3 LSBs
RP0 or RP1
Selected
RP points
to start
of working
register
block
OPERAND
MSB Point to
RP0 ot RP1

Figure 3-2. Working Register Addressing