CONTROL REGISTERS S3C8245/P8245/C8249/P8249
4-18
OSCCON Oscillator Control Register F3H Set 1,Bank 0
Bit Identifier .7 .6 .5 .4 .3 .2 .1 .0
nRESET Value 00000000
Read/Write –––R/W R/W R/W R/W
Addressing Mode Register addressing mode only
.7–.5 Not used for the S3C8245/C8249
.4Sub-system Oscillator Driving Ability Control Bit
0Strong driving ability
1Normal driving ability
.3Main System Oscillator Control Bit
0Main System Oscillator RUN
1Main System Oscillator STOP
.2Sub System Oscillator Control Bit
0Sub system oscillator RUN
1Sub system oscillator STOP
.1Not used for the S3C8245/C8249
.0System Clock Selection Bit
0Main oscillator select
1Subsystem oscillator select
NOTE: When OSCCON.4 is set to "0", Sub operating current and sub idle current are large.