S3C9228/P9228

DEVELOPMENT TOOLS

 

 

SMDS2+ Selection (SAM8)

In order to write data into program memory that is available in SMDS2+, the target board should be selected to be for SMDS2+ through a switch as follows. Otherwise, the program memory writing function is not available.

Table 19-2. The SMDS2+ Tool Selection Setting

"SW1" Setting

Operating Mode

SMDS2

SMDS2+

 

 

 

 

R/W

R/W

 

 

 

Target

 

 

SMDS2+

Board

 

 

 

Table 19-3. Using Single Header Pins as the Input Path for External Trigger Sources

Target Board Part

Comments

External

Connector from

Triggers

External Trigger

 

Sources of the

Ch1

Application System

Ch2

 

You can connect an external trigger source to one of the two external trigger channels (CH1 or CH2) for the SMDS2+ breakpoint and trace functions.

IDLE LED

The Green LED is ON when the evaluation chip (S3E9220) is in idle mode.

STOP LED

The Red LED is ON when the evaluation chip (S3E9220) is in stop mode.

19-5

Page 239
Image 239
Samsung 8-Bit CMOS Microcontroller SMDS2+ Selection SAM8, SMDS2+ Tool Selection Setting SW1 Setting Operating Mode