Samsung SCX-4720FS, SCX-4520S manual Preparing a Document

Preparing a Document

You can use the document glass or the Automatic Document Feeder (ADF) to load an original document for copying, scanning, and sending a fax. Using the ADF, you can load up to 50 documents (47 ~ 105 g/m2, 12.5 ~ 28 lb) for one job. You can, of course, place only one sheet at a time on the document glass.

When you use the ADF:

•Do not load documents smaller than 142 x 127 mm or larger than 216 x 356 mm.

•Do not attempt to feed the following types of documents:

-carbon-paper or carbon-backed paper

-coated paper

- onion skin or thin paper	5
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading
documents.
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading documents.
• Do not load documents that include different sizes or
weights of paper.
• Do not load booklet, pamphlet, transparencies, or
documents having other unusual characteristics.

COPYING 5.3