Samsung SCX-4720FS, SCX-4520S manual Up or 4 Up Copying

1 2

2-up copying

1 2

3 4

4-up copying

3Press Special Copy or the scroll button ( or ) until “2 sides in 1pg” displays on the bottom line.

4Press Enter to make your selection.

5If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See “Setting Copy Options” on page 5.7.

6Press Start to begin copying.

Your machine begins scanning the front side.

7When “Set Backside” displays on the bottom line, open the document cover and flip the document over. Close the cover.

NOTE: If you press the Stop/Clear button or if no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to Standby mode.

8Press Start again.

2 Up or 4 Up Copying

This copy feature is available only when you load documents in the ADF.

1Load the documents to be copied in the ADF.

2Press Special Copy.

3Press Special Copy or the scroll button ( or ) until “2 UP” or “4 UP” displays on the bottom line.

4Press Enter to make your selection.

5If necessary, customize the copy settings, including number of copies, darkness, and original type, by using the control panel buttons. See “Setting Copy Options” on page 5.7.

NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button for making a 2 or 4 Up copy.

6Press Start to begin copying.

5.12COPYING