Mode Recommended for | Samsung SCX-4520S, SCX-4720FS guide

3When the mode you want to use displays, press Enter to make your selection.

The document types recommended for the resolution settings are described in the table below:

	Mode	Recommended for:

	Standard	Documents with normal sized characters.

	Fine	Documents containing small characters or thin
	Fine	lines or documents printed using a dot-matrix
		printer.

		Documents containing extremely fine detail.
	Super Fine	Super Fine mode is enabled only if the
	Super Fine	machine with which you are communicating
		also supports the Super Fine resolution. See
		the notes below.

	Photo Fax	Documents containing shades of gray or
	Photo Fax	photographs.
		photographs.

		Documents with colors. Sending a color fax is
		enabled only if the machine with which you are
	Color Fax	communicating supports color fax reception
		and you send the fax manually. In this mode,
		memory transmission is not available.

NOTES:

•For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

•When your machine is set to Super Fine resolution and the fax machine with which you are communicating does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine.

7.10FAXING (SCX-4720F/4720FS ONLY)

Image 149

Samsung SCX-4520S, SCX-4720FS manual Mode Recommended for

Contents

Page About the User’s Guide Contact Samsung World Wide Iii Contents Printing Tasks Scanning Troubleshooting Using USB Flash Drive Appendix C Printing from a Macintosh Important Precautions and Safety Information Laser Safety Statement Power Saver Ozone SafetyMercury Safety Recycling Canadian Radio Interference Regulations Radio Frequency EmissionsUnited States of America FCC Information to the User Fax Branding FCC Statement for Wireless LAN use You should also know that Ringer Equivalence Number EC Certification Declaration of Conformity European CountriesApprovals and Certifications Regulatory Compliance Statements Wireless Guidance Xviii Replacing the Fitted Plug for UK Only Page British English American English Differences Between British and American English Memo Introduction Special Features Understanding Component Locations Print with excellent quality and speed Special FeaturesHandle paper flexibly Save time and money Use a USB flash drive Wireless LAN 802.11b Wireless LAN Machine FeaturesFeatures SCX-4520 SCX-4520S 4720F 4720FS Front View Understanding ComponentLocations EXT Jack Connector Tray 2 CableRear View SCX-4720F/4720FS Control Panel Functions Introduction SCX-4520/4520S Introduction Installing Software Setting Up Your MachineSetting Up the Machine System Quick Install Guide CD-ROM Starter Toner Cartridge AC Power CordPower cord must be plugged into a grounded power socket Unpacking Tape Clearance Space Selecting a Location Installing the Toner Cartridge Groove Tab Loading Paper Getting Started Changing the Size of the Paper in the Paper Tray Getting Started Making Connections TAM lead For UK users only To the parallel port on your computer Turning the Machine On Changing the Display Language Setting Up the Machine System SCX-4720F/4720FS Only Setting the Machine ID Entering Characters Using Number Keypad Changing Numbers or Names Keypad Letters and NumbersInserting a Pause Key Assigned numbers, letters, or characters When the cursor is not under the AM or PM indicator Setting the Date and Time Changing the Clock Mode Setting the Paper Size and Type Using and press Enter to save it Speaker, Ringer, Key Sound, Alarm SoundUse the scroll button Want to use and press Enter Use the scroll button Press On Hook Dial. a dial tone sounds from the speaker Speaker Volume Toner Save Mode Using the Save Modes Power Save Mode Scan Lamp Save Mode Linux Driver About Samsung SoftwarePrograms for Windows Feature Printer Driver FeaturesMacintosh Printer Driver SCX-4520S/4720FS only PCL 6 Printer PostScript Driver Requirements Recommended Installing Samsung Software in WindowsSystem Requirements Boots up Installing Samsung Software Getting Started Getting Started Click Install SmarThru Installing Samsung SmarThru Components you want to install. Click Next Repairing Software Removing Software Uninstalling the MFP Driver Uninstalling Samsung SmarThru Printer Settings Utility window opens Using the Printer Settings Utility Phonebook Tab SCX-4720F/4720FSOnly Scan Settings Tab Printer Tab When you click Group dial, the following window opensClick the Printer tab to configure print system settings Firmware Update Tab Paper Handling Paper Type, Input Sources, and Capacities Selecting Print MaterialsInput Source/Capacity Paper Type Tray Guidelines for Paper and Special Materials Standard Tray Paper full Paper empty Multipurpose Tray Paper Handling Using the Manual Feed Mode Tips on Using the Multipurpose Tray Printing to the Front Output Tray Face down Selecting an Output Location Open the rear door by pulling it upward Printing to the Rear Output Slot Face upTo use the rear output slot Paper Handling Printing Tasks Open the document you want to print Printing a Document in Windows To stop a print job from the Printers folder Canceling a Print JobDouble-click the Samsung SCX-4x20 Series PCL 6 icon From the Document menu Select the Samsung SCX-4x20 Series PCL 6 machine icon Printer Settings PropertyDescription Orientation Layout tabLayout Options Property Description Copies Paper TabSize Paper loaded in the tray Property Description Graphic Tab TrueType Toner SaveTrueType Options button TrueType Options Extras Tab When the Print All Text Black option isPrint All Text Black Option Printer Tab About TabOption Description Overlay Using Help Using a Favorite Setting From the Type drop-down list Printing Multiple Pages on One Sheet of PaperFrom the Layout tab, choose Multiple Pages per Side Printing Posters Inches Fitting Your Document to a Selected Paper Size Multiple Pages per Side from the Layout tab Printing a Reduced or Enlarged Document Click OK and start printing Using WatermarksUsing an Existing Watermark Creating a Watermark Deleting a Watermark Editing a Watermark Creating a New Page Overlay Using OverlaysWhat is an Overlay? Edit Overlay window, click Create Overlay Using a Page Overlay Printing Tasks Click Delete Overlay Deleting a Page Overlay Memo Copying Selecting the Paper Tray Loading Paper for Copying Preparing a Document Making Copies on the Document Glass Images, use the document glass To clear the settings, use the Stop/Clear buttonMaking Copies from the Automatic Document Feeder Adjust the document guides to the document size Darkness Setting Copy OptionsOriginal Type If you have an original document containing faint markings Press Reduce/Enlarge Reduced/Enlarged CopyTo select from the predefined copy sizes Press No. of Copies Using Special Copy FeaturesNumber of Copies Press Special Copy Clone CopyingCollation Copying Sides on 1 Page Copying Auto Fit Copying Up or 4 Up Copying Poster Copying Changing the Default Settings Setting the Time Out Option Memo Scanning Scanning Basics Scanning From the Control Panel to an Application Scan To Scanning Using Samsung SmarThruSmarThru 4 window opens Print CopyApplication Mail Web Using Onscreen Help FileSettings From the Start menu on your desktop window, select Scanning Using the WIA DriverSettings, Control Panel, and then Scanners Cameras.6 Scanning to USB Flash Drive Page Scanning Using Network Scan Setting the Network Scan Option Scanning Setting Network Scan Timeout Faxing SCX-4720F/4720FS only Changing the Fax Setup options Setting Up the Fax System Available Fax Setup Options Receive Start Code is preset to *9* at Discarded. Settings range from 0 to 30 mmFactory. Settings range from 0 to 9. See You can set your machine to print a report Drpd Mode Pattern Detection Drpd feature, whichDetails about this feature, see This menu, you can set the machine to Loading a Document To fax a document using the Automatic Document Feeder ADF To fax a document from the document glass Page Adjusting the Document Resolution Mode Recommended for Page Redialing the Last Number Sending a Fax ManuallyTo redial the number you last called Press Redial/Pause Automatic Redialing Confirming Transmission About Receiving Modes Receiving a Fax Receiving Manually in Tel Mode Receiving Automatically in Fax ModeYour machine is preset to Fax mode at the factory Loading Paper for Receiving Faxes Receiving Manually Using an Extension Telephone Receiving Automatically in Ans/ Fax Mode Receiving Faxes Using the Drpd Mode Receiving Faxes in the Memory Storing a Number for One-touch Dialing One-touch Dialing Sending a Fax using a One-touch Number Storing a Number for Speed Dialing Speed DialingPress Phone Book on the control panel Start over with another speed-dial number, press Upper Feed the documents face up into the ADF. Or Sending a Fax using a Speed Dial Number Enter Setting a Group Dial NumberGroup Dialing Editing Group Dial Numbers Sending a Fax Using Group Dialing Multi-address Transmission Searching for a Number in Memory Press Enter when Search&Dial appears on the displaySearching Sequentially through the Memory Searching with a Particular First Letter Printing a Phonebook List Sending Broadcast Faxes Other Ways to Fax Will not be present Load the documents face up into the ADF Sending a Delayed Fax If you do not want to assign a name, skip this step Sending a Priority Fax Page Adding Documents To a Scheduled Fax Canceling a Scheduled Fax Using Secure Receiving Mode Additional Features Sent Fax Report Printing ReportsPhonebook List Received Fax Report Power Failure ReportSystem Data List Scheduled Job Information Printing a Report Using Advanced Fax SettingsScan Journal Advanced Fax Setting Options Changing Setting OptionsIs completed without any error Faxing SCX-4720F/4720FS only Be sent All Delete option Maintenance Clearing the Memory Cleaning the Inside Cleaning Your MachineCleaning the Outside Maintenance Cleaning the Scan Unit Toner cartridge storage Maintaining the Toner CartridgeSaving toner Expected Cartridge Life Redistributing Toner Replacing the Toner Cartridge Close the front door Notification cases are like this Setting Notify Toner Option SCX-4720F/4720FS Cleaning the Drum Ignoring the Toner Empty Message ADF rubber pad Approx ,000 pages Transfer roller Fuser unit Consumables and Replacement PartsItems Yield Average Replacing the ADF Rubber Pad Maintenance Server Information section Setting E-mail NotificationSetting the Machine Setup tab Recipient list & Conditions section SysAdmin E-mail Address enter the system Select Notification section This section, you can select various settings Setting the Contact Information tab Memo Troubleshooting Input Misfeed Clearing Document Jams Exit Misfeed Roller Misfeed Message Location of Jam Go to Clearing Paper JamsTray Optional Tray Fuser Area or Around the Toner Cartridge Troubleshooting Paper Exit Area Multipurpose Tray Tips for Avoiding Paper Jams Display Meaning Suggested solutions Clearing LCD Error Messages Clear the jam. See Cartridge Fuser area Set up a copy or fax Try again Operation with noLSU Error Problem has occurred 4720F/4720FS Assigned to it Only for the SCX Use has no numberAdd Paper Tray has run out Operation You are doing the Add Clear the jam. See page 9.5 Stop/Clear button Condition Suggested solutions Solving Other ProblemsPaper Feeding Problems Select Samsung SCX-4x20 Series Printing ProblemsCondition Possible cause Suggested solutions SCX-4x20 Series PCL 6 machine icon Select Download as Bit Image Printing Quality ProblemsTrueType Options window Light or faded print Dropouts Toner specsVertical lines Gray background Defects Toner smearMisformed Characters Skew Condition Character Voids Loose tonerHorizontal stripes Curl Copying Problems Scanning Problems Scanning has failed Power is on, Then restart your Computer Port is DisabledPower may be off There may be a copying or printing job Computer screen Machine does not Noisy phone line can cause line errorsSend On the document glass TX should show up on the display Can receive your fax Problem Possible Cause and Solution Common Linux Problems List Interface MFP port, the situation of simultaneous MFP port, the situation of simultaneous accessScanning Present port’s owner is not functioning properly Command If you don’t want to uninstall MFP driver and install itEncounter error Can’t print when Installable Options section to Installed Troubleshooting PostScript Errors SCX-4720F/4720FS onlyProblem Possible Cause Solution Printing Errors Common Macintosh Problems SCX-4720F/4720FS onlyProblems in the Chooser Using USB Flash Drive About USB Flash Drives Installing a USB Flash Drive Load the document face up into the ADF Scanning With Default Settings Scanning With Your Own Settings Using USB Flash Drive Managing the USB Flash Drive Changing the Default Settings Deleting an Image File Otherwise, select No by pressing the scroll button or Formatting the USB Flash Drive Viewing the USB Memory Status Printing From the USB Flash Drive Backing Up Data Using USB Flash Drive Using Your Machine in a Linux Getting Started Supported OS Installing the MFP DriverRecommended Hardware Requirements Software Click Install Installing the MFP Driver Using Your Machine in Linux A.5 Click Next Click Finish Click Uninstall Double-click MFP Configurator on the desktop Using the MFP ConfiguratorOpening the MFP Configurator Printers Tab Printers Configuration Classes tab shows a list of available printer classes Scanners ConfigurationClasses Tab Sharing Ports Between Printers and Scanners MFP Ports Configuration Configuring Printer Properties Change the printer and print job properties Printing a DocumentPrinting from Applications Printing Files Click Properties Scanning a Document Using Your Machine in Linux A.15 Scanned image appears in the new Image Editor window Adding Job Type Settings You can use the following tools to edit the image Using the Image EditorTools Function Saves the image Allows you to flip the image vertically or horizontally Using Windows Installing PostScript Drivers Installing PostScript DriversPage Select Samsung SCX-4x20 Series, and then Maintenance Repairing PostScript DriversRemoving PostScript Drivers Click PrinterPostScript and then click Next Select Samsung SCX-4x20 Series PS Using PostScript Printer Driver FeaturesAccessing Printer Properties Property Description Orientation Printer SettingsLayout tab For the pages to print Property Description OrderPages Per Sheet Tray Selection Paper/Quality tab Printing from a Your Machine Available Driver Connection Installing Software for MacintoshRequirements Operating system Mac OS 8.6 ~ 9.2/10.1~ Click Continue Click Install After the installation is finished, click Quit For a Network-connected Macintosh Setting Up the MachineMac OS 8.6 ~ Mac OS 10.1 ~ Select SCX-4x20 Series and click Add For a USB-connected MacintoshSelect the AppleTalk tab Printing a Document Printing Multiple Pages on One Sheet of Paper Using Advanced Printing Features Select Scheduler Scheduling a Print Job Using Your Machine on D a Network Wireless Network-connected Machine Wired Network-connected MachineAbout Sharing the Machine on a Network Locally-Shared Machine Setting Up the Host Computer Setting Up a Locally-Shared MachineSetting Up the Client Computer From the Start menu, select Control Panel from Settings Select Local port and click New Port Windows NT 4.0/2000/XP Supported Operating Systems Setting Up a Network-Connected MachineConfiguring Network Parameters on the Control Panel Network Operating Novell Netware 4.x, 5.x System Printing a Network ConfigurationVarious Linux OS SCX-4520S/4720FS only Setting Network Protocols Static Addressing Configuring TCP/IP Dynamic Addressing BOOTP/DHCP Configuring IPX Frame Types Page Using Your Machine on a Network Bit WEP Digits Characters 26digits Hexadecimal Alphanumeric Memo Installing Machine E Options Installing Memory Dimm Installing Machine Options E.3 Select the Samsung SCX-4x20 Series PS printer Removing a Memory Dimm Network Card options Installing a Network Interface CardEthernet 10/100 Base TX Ethernet 10/100 Base TX + Internal Guide Installing Machine Options E.7 Installing Machine Options Reconnect the power cord and turn the machine on Installing an Optional Tray Installing Machine Options E.11 Setting Tray 2 in the Printer Properties Select the Samsung SCX-4x20 Series PS machine icon Then PrintersClick the right mouse button on the machine icon and select Properties Memo Specifications General Specifications Module Scanner and Copier SpecificationsCompatibility Twain standard Scanning method Gray scale Levels Printer Specifications Compatibility ITU-T Group Applicable line Facsimile Specifications For the SCX-4720F/4720FSChart Overview Paper Specifications Legal X 14 Bond 16 to M2 bond 216 x 356 mm Lb for Paper Dimensions Weight CapacitySupported Sizes of Paper Symptom Problem with Paper Solution Guidelines for Using Paper Category Specifications Paper SpecificationsPaper Output Capacity Paper Storage Environment Minimum Maximum Envelopes Envelopes with Adhesive Strips or Flaps Envelopes with Double Side SeamsEnvelope Margins Type of Address Minimum Maximum Transparencies Labels Index Windows 2.28 PostScript B.2 Printer properties Linux A.12 Windows Linux A.6 Windows PostScript B.4 Visit us at