G
ETTING
S
TARTED
2.24
5
Press the scroll button ( or ) to display “End Time” and
press
Enter
.
6
Enter the time and date when the toll save transmission
ends, using the number keypad.
7
Press
Enter
to save the setting.
8
To return to Standby mode, press
Stop/Clear
.
Once Toll Save mode is activated, your machine stores into
memory all of the documents to be faxed and sends them at the
programed time.
To turn Toll Save mode off, press
Toll Save
again. The button
backlight turns off and the mode is deactivated.
N
OTE
: Once the toll-saving time is set, the
Toll Save
button
allows you only to enable or disable the toll save mode. To change
the time setting, use the
Toll Save
item in the
Advanced Fax
menu. See page 7.38.
Power Save Mode
Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this mode
on and select a length of time for which the machine waits after
a job is printed before it switches to a reduced power state.
1
Press
Menu
until “Machine Setup” appears on top line of
the display.
2
Press the scroll button ( or )
until “Power Save” appears
on the bottom line. Press
Enter
.
3
Press the scroll button ( or ) to display “On” on the
bottom line and press
Enter
.
Selecting “Off” means that the power save mode is
deactivated.
4
Press the scroll button ( or ) until the time setting you
want appears.
The available options are 5, 10, 15, 30, and 45 (minutes).