Samsung SCX-4520S, SCX-4720FS manual Setting the Network Scan Option, Scanning Using Network Scan

Setting the Network Scan Option

If you installed an optional network interface card, your machine automatically recognize it and the “Network Scan” menu is added to the control panel menu settings. From this menu, you can enable or disable scanning on your machine via a network-connected computer.

1Press Menu on the control panel until “Maintenance” appears on the top line of the display.

2Press the scroll button ( or ) until you see “Network Scan” on the bottom line and press Enter.

3Press the scroll button ( or ), to select “Enable” or “Disable”.

Select “Enable” to use the Network Scan option. This is the default setting.

Select “Disable” it you do not want to use the Network Scan option.

4Press Enter to complete your selection.

Scanning Using Network Scan

Using Network Scan you can scan a document from your machine to your computer through the network.

If you use SmarThru, you must initiate the scan procedure from the computer. Scanned data will go only to the computer which is directly connected to the machine.

Scanned documents can be saved as JPEG, TIFF or PDF files. You can also secure the scanned files by entering a user name and authentication code (PIN) via the number keypad on the front of your machine.

1Load the document(s) face up into the ADF.

OR

Place a single document face down on the document glass. For details about loading a document, see page 7.6.

2Press Scan-toand select Network Scan. “Select User ID:” appears on the display.

6.10SCANNING