Samsung SCX-4720FS Machine does not, Send On the document glass TX should show up on the display

Condition	Suggested solutions
The machine does not	• Make sure that the document is loaded in the ADF or
send.	on the document glass.
	• “TX” should show up on the display.
	• Check the fax machine you are sending to, to see if it
	can receive your fax.
The incoming fax has	• The fax machine sending you the fax may be faulty.
blank spaces or is of poor-	• A noisy phone line can cause line errors.
quality.	• Check your machine by making a copy.
	• The toner cartridge may be empty. Replace the toner
	cartridge, referring to page 8.8.
Some of the words on an	The fax machine sending you the fax had a temporary
incoming fax are	document jam.
stretched.
There are lines on the	Check your scanning glass for marks and clean it. See
documents you send.	page 8.5.
The machine dials a	The other fax machine may be turned off, out of paper,
number, but a connection	or cannot answer incoming calls. Speak with the other
with the other fax	machine operator and ask her/him to sort out the
machine fails.	problem.
Documents are not stored	There may not be enough memory to store the
in memory.	document. If the display shows a “Memory Full”
	message, delete from memory any documents you no
	longer need and then try again to store the document.
Blank areas appear at the	You may have chosen the wrong paper settings in the
bottom of each page or on	user option setting. For details about paper settings, see
other pages, with a small	page 2.20.
strip of text at the top.

9

TROUBLESHOOTING 9.27