Using Address Label

A One-touch label sheet is included with your machine. As you store numbers in one-touch dial buttons, make a note of the numbers on the label to remind you which number is stored in each position.

1. Remove the clear cover and label.

2. Write information on the label and replace the label and cover.

You may want to use pencil in case you wish to change these numbers later.

Speed Dialling

You can store up to 80 numbers in 2-digit Speed Dial locations (01-80).

Storing a Number for Speed Dialling

1.Press and hold Speed(#) for about 2 seconds.

LOC. [01-80] ##

2.Enter a 2-digit location number (01 through 80) where you want to store a number, then press Start/Enter.

If a number has already been stored in a location, the display shows the number. To edit the number, see the next page.

3. Enter the number you want to store, then press Start/Enter.

Sxx:05512637522

where xx represents the speed location you have selected at step 2.

4.To assign a name to the number, enter the desired name. For information on how to enter names, see page 3.19.

If you do not want to assign a name, skip this step.

Stand-alone Fax 3.23

Page 72
Image 72
Samsung SF-555P manual Speed Dialling, Press and hold Speed# for about 2 seconds