5.The display asks you to press a one-touch button or to enter a 2-digit speed dial number that you wish to include in the group.

6.Press a one-touch button where the fax number you wish to include in the group is stored.

Or,

Enter a 2-digit speed dial location where the fax number you wish to include in the group is stored.

7.Press Start/Enter. The display shows the fax number which was stored in the selected location.

8.Repeat step 6 to 7 to enter additional numbers into the selected group.

9.Press Start/Enter when you have entered all the desired destinations. The display asks you to enter a name.

10.To assign a name to the group, enter the desired name. See page 3.19 for entering letters.

Or,

If you do not want to assign a name, skip this procedure.

11.Press Start/Enter. The display asks you to select a one-touch number for another group dial.

12.To continue storing, press the wanted one-touch button and repeat steps 4 through 11.

13.To stop storing, press Stop. The display returns to Standby mode.

Note: You cannot include one group dial number in another group dial number.

Stand-alone Fax 3.41

Page 90
Image 90
Samsung SF-555P manual Stand-alone Fax