Group Dialling (for Multi-Address Transmission)

Multiple one-touch and speed dial numbers can be registered as a group. By using the group number, you can send a document to multiple parties in a single operation. The machine will dial the remote numbers in stored sequence. If the number is busy, the machine will dial the next stored number. After dialing all of the stored numbers, the unit will automatically redial any number that was busy. Before you can use this feature, you must program the group numbers desired.

Storing One-Touch or Speed Dial Numbers for Group Dialing

1.Press Setup on the front panel.

The display shows the first menu; FAX NUMBER/NAME.

2.Press or until ‘GROUP DIAL SETUP’ appears, and press Start/Enter.

3.Press one of the 20 one-touch buttons that you want to use for group dial.

4.The display asks you to confirm that you use this button for group dialing.

GROUP NO.: T15

Press Start/Enter to confirm.

If you do not want to use the one-touch number, press Stop. Then,press another one-touch button.

Note: If the button you chose has already been used for one-touch dialing , the display warns the one-touch number is used.

T15 USED !

Then you are allowed to select ‘OTHER’ or ‘RENEW’ by pressing or . To replace that number and continue, select RENEW and to start over with a different location, select OTHER. When the desired option is displayed, press Start/Enter.

3.40 Stand-alone Fax

Page 89
Image 89
Samsung SF-555P manual Group Dialling for Multi-Address Transmission, Press Start/Enter to confirm