The current reception mode is displayed when the machine is in Standby mode.

08-DEC 15:30 FAX Current reception mode

If you seldom use the fax line for voice conversations, set your machine to receive a fax automatically by selecting FAX mode.

Loading Paper for Receiving Faxes

The instructions for loading paper in the paper input tray are the same whether you are printing, faxing, or copying, except that faxes can only be printed on letter-, A4-, or legal-sized paper. See “Loading Paper” on page 1.15 for instructions.

After loading paper for receiving faxes, set the paper size to the size of paper you normally load in the paper input tray. SF-555P product uses this setting when printing reports and determining autoreduction for incoming faxes. See page 3.3 to set the paper size.

Note: As for SF-555P, the printing function does not use this setting. If you are loading special-sized media only for your current print job, do not change this setting. After you have finished printing, reload the original paper.

Receiving Automatically in FAX Mode

The SF-555P is preset to FAX mode at the factory. If you have changed the fax mode, take the following steps to receive faxes automatically:

1.Press and hold down Rcv. Mode/Contrast on the front panel repeatedly until the display shows ‘FAX MODE’.

2.When you receive a call, the machine answers the call on a specified number of rings and receives a fax automatically. To change the number of rings. See ‘Setting User-Selectable System Options’ on page 3.2.

To adjust the ringer volume, see ‘Setting Volume’ on page 3.1.

3.14 Stand-alone Fax

Page 63
Image 63
Samsung SF-555P manual Loading Paper for Receiving Faxes, Receiving Automatically in FAX Mode