Sending Confirmation

Shows the fax number, the number of pages, elapsed time of the operation, the communication mode, and the communication results. You can print the this confirmation report in one of the following ways according to your setting in System Setup(see page 3.3):

Automatically after each transmission (ON)

Automatically only if an error occurs during transmission (ERROR)

No report printed at all (OFF). You can print this report manually.

Schedule Information

Shows the document currently stored for Delayed transmission, Priority transmission, Broadcasting, Send polling and Toll Save fax. The list shows the starting time, type of operation, etc.

System Data List

Shows the status of the user-selectable options. After you change any setting, print this list to confirm your changes.

Multi-Communication Report

Is printed automatically after sending documents to or receiving documents from more than one location.

Callback Message

Is printed out automatically when you do not respond to a remote operator’s Voice Request.

Power Failure Report

Is printed out automatically when power is restored after a power failure. This report shows data erased by the power failure.

TO PRINT LISTS

1.Press Report/Help on the front panel. The display shows the first menu.

HELP

2.Press or until you find the list you want to print, then press Start/Enter. The selected list will be printed.

Stand-alone Fax 3.39

Page 88
Image 88
Samsung SF-555P Sending Confirmation, Schedule Information, System Data List, Multi-Communication Report, Callback Message