6.If you want to send to more than one location, repeat steps 4 and 5.

Note: You cannot use Group dial numbers for another fax number.

Or,

To send to one location or when you complete the last fax number setting, press Start/Enter.

7.The display asks you to enter a name. If you want to assign a name to the transmission, enter the name. If not, skip this step.

For details on how to enter the name using the number keypad, see page 3.19.

8.Press Start/Enter. The display shows the current time and asks you to enter the time when the fax is to be sent.

TIME(10:30)10:30

The current time

9.Enter the time by using the number keypad, then press Start/Enter.

Enter the time in 24-hour format. For example, enter 2230 for 10:30 P.M. If you set a time earlier than the current time, the document will be sent at that time on the following day.

10.The document will be scanned into memory. The display shows the memory capacity and the number of pages being stored.

11.The machine returns to Standby mode and the display alternates between messages to remind that you are in Standby mode and that a Delayed Transmission is set.

Note: To cancel the operation reserved in memory, see ‘Cancelling a Scheduled Operation’ on page 3.34.

3.30 Stand-alone Fax

Page 79
Image 79
Samsung SF-555P manual TIME10301030