2RECORD SET

7 Turn the jog dial to select the “REC RATE” setting and then turn the shuttle dial clockwise.

<ALARM REC MODE

SET>

ALARM RECORDING

 

: ENABLED

PICTURE QUALITY

 

: ENHANCED

PICTURE QUALITY SET

->

AUDIO RECORDING

 

: OFF

ALARM INTERLEAVE

 

: ONLY

REC RATE: 12.5FPS,

DURATION: 20SEC

PRE-ALARM RECORDING

 

: ON

REC RATE: 12.5FPS,

DURATION: 5SEC

ALARM TRIGGER

 

: ALARM

MOTION SENSOR

 

->

[Settings] (‹ indicates default setting)

SettingDescription

100, 50, 25, 16.67, ‹12.5, 8.333, 6.25, 5,

4.167, 3.571, 3.125, Recording is performed at the 2.778, 2.5, 2.273, 1.923, selected recording rate (unit: FPS). 1.667, 1.471, 1.316, 1.19, 1.087, 1

Refer to “Table of pre-alarm recording times” (JP.224) when setting.

zWhen mirroring is set to “ON”, configurable recording rates are limited.

zWhen only one camera is connected, recording is performed at 25 FPS even if 50 or 100 FPS are set.

zWhen four cameras are connected and 100 FPS is set, recording is performed at the recording rate close to the set rate (100 FPS) divided by the number of cameras. (Example: When 8 cameras are connected and the recording rate setting is 100 FPS, the actual recording rate is 12.5 FPS)

8 Turn the jog dial to select the “DURATION” setting and then turn the shuttle dial clockwise.

The cursor moves to “ALARM TRIGGER”.

<ALARM REC MODE

SET>

ALARM RECORDING

 

: ENABLED

PICTURE QUALITY

 

: ENHANCED

PICTURE QUALITY SET

->

 

AUDIO RECORDING

 

: OFF

ALARM INTERLEAVE

 

: ONLY

REC RATE: 12.5FPS,

DURATION: 20SEC

PRE-ALARM RECORDING

 

: ON

REC RATE: 12.5FPS,

DURATION: 5SEC

 

 

 

ALARM TRIGGER

 

: ALARM

 

MOTION SENSOR

 

->

 

[Settings] (‹ indicates default setting)

SettingDescription

‹5SEC, 10SEC, 20SEC,

40SEC, 1MIN, 2MIN, 3MIN, Records for the set duration. 4MIN, 5MIN, 10MIN, 15MIN

9 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

“PRE” appears in the operation display. When an alarm occurs, “ALARM” is displayed.

EXIT/OSD

Number of alarms

 

“PRE” display

 

01-01-07 00:00:00 REC REPEAT EN A PRE 0000000

02

zWhen “PRE-ALARM RECORDING” is set to “ON”, press the [REC/STOP] button to record past video.

The alarm number next to “PRE” is not updated.

zPre-alarm recording is performed during the period set by “DURATION” before an alarm occurs. To play back pre- alarm recordings, perform alarm search (using the [SEARCH] button). (JP.39)

Recordings are played back at the point the alarm occurs. Use the shuttle dial to begin reverse playback.

English

103