Sanyo DSR-5709P SETTINGS, Suspending video recording, 2 Press the [MENU RESET] button, Movement and confirmation in sub-menusand setting screens, To suspend video recording:

MENU CONFIGURATION AND OPERATIONS

Movement and confirmation in sub-menus and setting screens

Use the jog dial and shuttle dial to move through the sub- menus and setting screens and to confirm the settings.

							(2)
			TOTAL	<RECORDING AREA SET>		500GB
	(1)		INTERNAL HDD		:	500GB	(3)
		RECORDING AREA		:	80 %
			AREA FULL RESET		->
			ARCHIVE AREA		:	20 %
			AREA FULL RESET		->
		CAUTION: WHEN THE AREA SETTING IS CHANGED,
			THE WHOLE AREA WILL BE INITIALIZED !
(1)	To move the cursor			Turn the jog dial.
	up or down
(2)	To move the cursor			Turn the shuttle dial
	right or to confirm			clockwise.
	an item
(3)	To change a			Turn the jog dial.
	setting value

Resetting menu items

Use the following procedure to restore only those items in the displayed setting screen to their default values.

1 Open the menu screen containing the items to be returned to default settings.2 Press the [MENU RESET] button.

The displayed settings are restored to their default values.

Suspending video recording

You cannot change menu settings during video recording. You must temporarily suspend recording in order to change settings.

If you want to resume recording without changing the current settings, follow the steps below to suspend and resume.

To suspend video recording:

Open the <MAIN MENU> screen, and press and hold the [SHUTTLE HOLD] button for approximately three seconds. The recording lamp goes off and all the recording functions (normal, timer and alarm recordings) switch to the suspend mode. You can change menu settings during the suspend mode.

While recording is suspended, you see the <--> mark displayed on the menu screen.

<-->	<MAIN MENU>
	1.INITIAL SET	->
	2.RECORD SET	->
	3.GENERAL SET	->
	4.SCREEN SET	->
	5.POWER LOSS/USED TIME	->
	6.INITIALIZATION LOG	->
	7.COPY MENU SETTINGS	->
	8.ADVANCED MENU SET	->

MOVE:JOG SELECT:SHUTTLE

To resume video recording: Press the [EXIT/OSD] button.

Recording resumes under the same conditions that existed when it was suspended.

zWhile the recording is suspended, the digital video recorder does not accept any new recording operation.

zIf the menu setting file is uploaded or power supply is interrupted while recording is suspended, the original recording conditions will not be restored.

SETTINGS

	SHUTTLE
AR	E	NT
E		E
L		R
C

[MENU RESET] button

MENU

RESET

64 English