Sanyo DSR-5709P Making network settings, Making network connections

3GENERAL SET

Network settings

Use the following procedure to make menu settings for the digital video recorder and to monitor video from a PC via a network (LAN).

A LAN cable must be connected to the LAN terminal on the rear panel before proceeding.

Making network connections

z Connecting to a PC directly (without using a switch)

1 - 16

IN OUT

AUDIO

LAN cable (10BASE-T/100BASE-TX Category 5)

	1	2
	3	4
PC	Monitor

(sold separately)

z Connecting to an intranet (using a switch)

1 - 16

IN OUT

AUDIO

Switch	1	2
	3	4
	Monitor
	(sold separately)
		PC
Intranet	LAN cable
	(10BASE-T/100BASE-TX
	Category 5)

PC

PCSwitch

Making network settings

The setting is necessary for controlling the DVR from a PC on a network.

Contact the network administrator for more details on setting values.

zDHCP

Set whether the IP address is automatically acquired from the DHCP server or manually set. Set “ON” when automatically acquiring an IP address from an Internet service provider or from a DHCP server on a LAN, and set “OFF” when using a fixed IP address.

zIP ADDRESS

Select “OFF” for “DHCP” to set. Generally, a private IP address is used when a fixed IP address is set in a LAN (example: 192.168.0.0 – 192.168.255.255).

Be sure not to duplicate IP addresses from other devices.

zSUBNET MASK

Select “OFF” for “DHCP” to set. The same value is set throughout the LAN.

zGATEWAY

Select “OFF” for “DHCP” to set. When connecting from a LAN to a WAN or other differing network, specify the device IP address (on the LAN side).

zPORT

Sets open port. Default value is “80”.

zNETWORK SPEED

Sets restrictions for traffic in the LAN. Normally, set it to “NO LIMIT”.

zDNS SET

Settings relating to the Domain Name Server are performed in another screen.

zDNS SERVER

Set whether the DNS server IP address is automatically acquired or manually set. Generally this setting is “AUTO” when “ON” is selected for “DHCP”. When the DNS server address is specified by a network administrator or Internet service provider, select “MANUAL” and set the following items, “PRIMARY” and “SECONDARY”.

zPRIMARY

zSECONDARY

Set when “DNS SERVER” is set to “MANUAL”. Set the DNS server address received from the network administrator or Internet service provider.

English 125