Sanyo DSR-5709P SETTINGS, Setting time periods, 6 Press a [CAMERA SELECT] button, 9 Turn the shuttle dial clockwise twice, 8 Turn the jog dial to select “A” or “B”

2RECORD SET

6 Press a [CAMERA SELECT] button.

Press the button of the number of the camera for which motion sensors are to be set up.

-

On the DSR-5709P, press the [CAMERA SELECT] 1-9 button.

7 Turn the jog dial to move the cursor (reverse highlighting) to the position where a sensor is to be set and then turn the shuttle dial clockwise.

Turn the jog dial while pressing the [FUNC.] button to move the cursor (reverse highlighting) vertically.

Cursor can be moved up and down using the jog dial if a mark indicating such actions is displayed in the upper right of the screen.

FUNC.

CH01 T-1 LEVEL : OFF MODE : A

8 Turn the jog dial to select “A” or “B”.

A

“A” or “B” : Sensor set

“-” : No sensor

CH01 T-1 LEVEL : OFF MODE : A

9 Turn the shuttle dial clockwise twice.

The change is defined.

A

CH01 T-1 LEVEL : OFF MODE : A

10 Use the same procedure to set other sensor positions.

„To specify the start position and end position together within a range

(1)Turn the jog dial to move the cursor (reverse highlighting) to the start position and then turn the shuttle dial clockwise.

(2)Turn the jog dial to select “A” or “B” and then turn the shuttle dial clockwise. (“A” or “B” are yellow.)

(3)Turn the jog dial to move the cursor (reverse highlighting) to the end position and then turn the shuttle dial clockwise.

Start position
		A	A	A	A	A	A	A	A
		A	A	A	A	A	A	A	A
End position		A	A	A	A	A	A	A	A
	CH01			T-1		LEVEL : OFF MODE : A

Setting time periods11 Turn the jog dial to select “T-1” and then turn the shuttle dial clockwise.

“T-1” flashes.

A

CH01 T-1 LEVEL : OFF MODE : A

12 Turn the jog dial to select the time period and then turn the shuttle dial clockwise.

The cursor moves to “LEVEL”.

A

CH01 T-1 LEVEL : OFF MODE : A

[Settings] (‹ indicates default setting)

Setting	Description
‹T-1	Time period T-1
T-2	Time period T-2
T-3	Time period T-3
T-4	Time period T-4

If the time period is set to “ALL DAY LONG”, the display depends on the setting of “T-1”.

SETTINGS

106 English