Before installing and using this unit, please read this manual carefully
Be sure to keep it handy for later reference
PRECAUTION
WARNING:
Please note:
INTRODUCTION
CONTENTS
1 BEFORE USE
Notes on handling the internal HDD
The HDD and cooling fan are consumable
Connecting RS-485control terminals
Setting the motion sensors
Setting alarm operation and display
GENERAL SET
Setting for control terminal output
Hard disk initialization and mirroring
The various ways of displaying
Performing operations in play mode
Adjusting the image and audio
Downloading live images to a PC
3. ALARM THUMBNAIL SEARCH
Before Using DVR Viewer2
Structure of the Screen and the Function of each
Switching the Display Pattern
Selecting the Channel Displayed
Functions of the Viewer Operating Panel
1BEFORE USE
zLamp off: Normal operation
zFast flashing: Abnormal condition of hard disk
zSlow flashing: Abnormal condition of cooling fan
Replacement time of main components or parts
2NAMES AND FUNCTIONS OF PARTS
14.[EXIT/OSD] button and indicator z EXIT:
15.[PLAY/STOP] button and indicator (JP.32)
16. [ZOOM] button and indicator (JP.33)
17. [SEARCH] button and indicator (JP.38)
18. [STILL] button and indicator (JP.34)
1.Optional board slot
2.VIDEO IN terminals Connects to video cameras
3.VIDEO OUT terminals
4.ALARM IN terminals (1 to 16)
5.SENSOR ALARM OUT terminals
6.Control terminals
7.[ALL RESET] button
8.USB terminal
LAN terminal
10.AUDIO IN terminal
3INSTALLATION AND CONNECTIONS
RJ-11Pin locations
Connection
Cable types
RS-485termination switch settings
Operation
1 Connect as above
3 Operate the dome cameras with the front panel buttons. (JP.153)
LAN connection
Internet connection
Page
1PREPARING FOR USE
1 Press the [EXIT/OSD] button
1 Press the [MENU] button
4 Turn the shuttle dial clockwise
6 Press the [EXIT/OSD] button
Example: Setting 8:30 on 26 January
4 Turn the jog dial to select “01” and then turn the shuttle dial clockwise
5 Turn the jog dial to select “26” and then turn the shuttle dial clockwise
7 Press the [EXIT/OSD] button
Hard disk recording areas
[A]Recording area
2MONITORING VIDEO FROM A CAMERA
4 Press the [ZOOM] button to return to normal magnification
1 Press the [QUAD] button
2 To view video from other cameras, press the [QUAD] button again
3 To return to full screen display, press a [CAMERA SELECT] button
1 Press the [MULTI] button
2 To return to full screen display, press a [CAMERA SELECT] button
Example: Enlarging video during multi 9 screen display
1 Press the [PLUS] button during multi 9 screen display
2 Press a [CAMERA SELECT] button
Setting automatic full screen selection
1 Press the [SEQUENCE] button
2 Press the [SEQUENCE] button to end automatic selection
Setting automatic quad-screenselection
2 Press the [SEQUENCE] button
1 Press the [MON2] button
Viewing on a full screen
2 Press the No. 4 [CAMERA SELECT] button
Viewing on a quad screen
2 Press the [QUAD] button
3 Press the [SEQUENCE] button
4 Press the [SEQUENCE] or [QUAD] button to return to normal quad-screendisplay
Displaying alarm video in full screen format
3 Press the [MON2] button to end the monitor 2 setting procedure
3RECORDING
1 Set alarm recording. (JP.98)
2 When an alarm signal is detected
3 End alarm recording
1 Set pre-alarmrecording. (JP.102)
2 If an alarm is detected
1 Press the [MARK/COPY] button while recording video
4PLAY
(3)Returning to normal playback
Using reverse playback, fast-rewind,and reverse-slowplayback
(1) Performing reverse playback
(2) Performing fast-rewindplayback
(3) Performing reverse-slowplayback
(4) Returning to normal playback
1 Press the [STILL] button during playback
2 Press the [STILL] button again to resume normal playback
1 Turn the jog dial while playback is paused
1 Press the [MARK/COPY] button during playback on a full screen
Playing video on quad screens
1 Press the [QUAD] button during playback
Playing video on multi 9 or multi 16 screens
1 Press the [MULTI] button during playback
Playing enlarged video
5 Press the [PLUS] button to return to the screen from before enlarging video
Using flash playback
1 Play video from the camera you want to
view using flash playback, on a full screen
5SEARCHING FOR RECORDED VIDEO
(7)BOOKMARK SEARCH (JP.42)
Page
3 Turn the jog dial to select the video for playback from the list
To display the next or previous recording
Entering an alarm number to search for an alarm video
1 In the search screen, press the [FUNC.] button and select “SEARCH”
2 Turn the shuttle dial clockwise
5 Press the [FUNC.] button
Entering a camera number to search for an alarm video
3 Press the [CAMERA SELECT] button for the camera number to search
4 Press the [FUNC.] button
To view alarm video before or after the current playback
1 Press the [ALARM] button during playback
3 Turn the jog dial to select the video for playback
Search by entering an alarm number
1 In the search screen, press the [FUNC.] button
3 Select alarm number by turning the jog dial and shuttle dial
Search by entering a camera number
Example: To search for a recording from camera 5 from 8:30 pm on 26 October
(1) RECORDING TOP:
(2) RECORDING END:
(3) CHANNEL:
3 Turn the shuttle dial clockwise while “CHANNEL” is selected
4 Press the [CAMERA SELECT] 5 button
The cursor moves to “DATE TIME”
5 Specify the date and time
(1)Turn the shuttle dial clockwise and turn the jog dial to “26” (day)
Page
Entering an archive number to search for an alarm video
3 Turn the jog dial and shuttle dial to select an archive number
5 Press a [CAMERA SELECT] button and then turn the shuttle dial clockwise
Setting the motion sensor for searching
5 Turn the shuttle dial clockwise
Page
Page
6SAVING (COPYING) RECORDED VIDEO
Play video to be copied
Example: Copying 10 seconds of video
2 Press the [STILL] button when the frame to be copied is displayed
3 Press the [MARK/COPY] button
4 Turn the jog dial clockwise
8 Specify the channel to copy
9 Turn the shuttle dial clockwise
To cancel copying
Example: Copying 20 images
1 Insert a USB memory
4 Press the [MARK/COPY] button
8 Turn the shuttle dial clockwise while “PICTURES” is flashing
10 Turn the jog dial to select “20” and then turn the shuttle dial clockwise
11 Specify the channel to copy
12 Turn the shuttle dial clockwise
13 Turn the shuttle dial clockwise
Play video to be copied on a full screen
Example: Copying the maximum video to the copy destination
1 Connect a recordable CD or DVD drive and insert a disc
9 Specify the channel to copy
10 Turn the shuttle dial clockwise
11 Turn the shuttle dial clockwise
Drive:
OS:
14 Specify the disc validation function settings
15 Turn the shuttle dial clockwise
Copying data onto multiple discs
1st disc
2nd disc
650MB
Formatting a USB memory, CD-RWor DVD+RW
1 Insert a USB memory, CD-RWor DVD+RW
2 Press the [MARK/COPY] button
Folder hierarchy for data copied onto a USB memory
Folder hierarchy for data copied onto a CD-R/RW or DVD+R/RW
MENU CONFIGURATION AND OPERATIONS
Movement and confirmation in sub-menusand setting screens
1 Open the menu screen containing the items to be returned to default settings
2 Press the [MENU RESET] button
Suspending video recording
To suspend video recording:
Page
1INITIAL SET
4 Turn the jog dial to select “MODE” under <SUMMER TIME SET
6 Turn the jog dial to select “USE” and then turn the shuttle dial clockwise
7 Set the date and time
Example: Set the summer time to begin at 25 March, 2007, 02:00
Set the summer time to end 28 October, 2007, 02:00
MONTH
Summer time begins
8 Use the same procedure to set the time on the second recorder
4 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise
4 Press the No. 3 [CAMERA SELECT] button
6 Turn the jog dial to select “H”
8 Repeat the above steps to enter the remaining characters
9 Press [EXIT/OSD] button after all digits are set
Example: Setting 26 October as a holiday
4 Set the day and month for item
5 Use the same procedure to set other holidays
Morning to lunchtime: 6:00 to 11:00
Lunchtime: 11:00 to 13:00
Lunchtime to evening: 13:00 to 20:00
Operations during the specified time periods
Setting automatic selection of camera video
Masking camera video using a gray pattern
Alarm recording using motion sensors
Timer period settings
Example 1: Setting periods using TIME PERIOD A and
zTIME PERIOD A T-1=6:00 T-2=11:30 T-3=13:30 T-4=18:00
zTIME PERIOD B T-1=6:00 T-2=8:00 T-3=14:30 T-4=20:00
5 Set the time for T-1
Timer period operations settings
Motion sensing for “TIME PERIOD B”
11 Press the [EXIT/OSD] button
2RECORD SET
Setting based on recording days
9 Set the time for timer recording
Example: Timer recording from 8 AM to 8 PM
14 Turn the shuttle dial counter-clockwise
15 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise
16 Press the [EXIT/OSD] button
Setting based on recording rate
Page
Page
Page
Default hard disk settings
Recording area allocations
Example: Setting the recording area to 50%
6 Turn the jog dial to select “YES”
5 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise
Page
01-01-0700:00:00 REC 5% EN A ALARM
Use the following procedure to set the storage period for recorded data
When the set period has expired, the corresponding data cannot be played back
Page
Setting the picture quality for each camera
8 Turn the shuttle dial clockwise
12 Press the [EXIT/OSD] button
(1) PROGRAM
(2) SELECT INDIVIDUAL CAMERA RATE
The <PROGRAM REC SET> screen is displayed
“P-1”flashes for “PROGRAM”
The cursor moves to “01” under “SELECT INDIVIDUAL CAMERA RATE (FPS)”
7 Turn the jog dial to select “5” and then turn the shuttle dial clockwise
Camera No. 1 is now set to record at a rate of 5. The cursor moves to “02”
Timer setting items
(1) WEEK
(2) START
(3) STOP
(4) PROGRAM
5 Turn the jog dial to set the day, and turn the shuttle dial clockwise
6 Setting the “START” and “STOP” time
Example: Setting a start time of 6:30 PM and an end time of 11:15 PM
10 Use the same procedure to set other items
To change a setting item
To cancel all set timer reservations
4 Press the [MENU RESET] button
OFF 12.5 FPS OFF
20:30
OFF
5FPS
Timer recording using an external timer
Example: Recording at a rate of 5 FPS using the EXT TIMER IN terminal
5FPS OFF
To set alarm recording
Page
“ONLY” flashes
The cursor moves to “REC RATE/DURATION”
ONLY
Video is recorded only from cameras with an
alarm occurring
14 Turn the shuttle dial clockwise
To set pre-alarmrecording
5 Turn the jog dial to select “ON” and then turn the shuttle dial clockwise
Page
Setting alarm triggers
Page
6 Press a [CAMERA SELECT] button
8 Turn the jog dial to select “A” or “B”
9 Turn the shuttle dial clockwise twice
10 Use the same procedure to set other sensor positions
To specify the start position and end position together within a range
Setting sensitivity levels
The cursor moves to “MODE”
Motion sensing is disabled
Motion sensing is enabled. Lower numbers
correspond to higher levels of sensitivity
To stop motion sensor recording
Page
Page
3GENERAL SET
2 Turn the jog dial to select “3.GENERAL
SET” and then turn the shuttle dial clockwise
(8)
(3)(4)
6 Use the same procedure to set the other items to “ON” or “OFF”
Page
(1)ALARM (default setting: OFF) Sounds a buzzer when an alarm occurs
(2)DISK FULL (default setting: ON)
(3) DISK ERROR (default setting: ON)
(4) LOCK WARNING (default setting: ON)
(5)KEY IN (default setting: OFF) Sounds a buzzer when a button is pressed
Page
Page
13 Press the [EXIT/OSD] button
Setting user ID
User level and privileges
Registering a user
6 Enter a user ID
8 Enter a password
10 Use the same procedure to register other users
Turning on the key lock, password lock and network lock
[SHUTTLE HOLD] button
2 Confirm the lock status
Canceling the key lock
1 During key lock, press the [SHUTTLE HOLD] button for approximately 3 seconds
Canceling the password lock or network lock
Example: While password lock is activated
Page
Page
Initializing the hard disk
4 Then turn the shuttle dial clockwise
Setting mirroring
9 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise
10 Press the [EXIT/OSD] button
Switching playback disks
Making network connections
Making network settings
6 Set “IP ADDRESS”
7 Set “SUBNET MASK”
8 Set “GATEWAY”
9 Set “PORT”
16 Turn the shuttle dial counter-clockwise
19 Press the [EXIT/OSD] button
Page
Page
User levels and privileges
Setting user
4SCREEN SET
7 Turn the jog dial to select “05” and then turn the shuttle dial clockwise
8 To render a certain channel unspecified:
Checking modified screen positions
5 Use the same operation to set the switching interval for quad screen display
Setting the time period to switch the display on the main monitor and monitor
Set the main monitor and monitor 2 display period for each camera
The <MAIN/MON.2 MONITOR SET> screen is displayed
“T-1”flash for “TIME PERIOD”
The cursor moves to “1S” for “01” and “MAIN MON.”
T-1
11 Use the same procedure to set other channels
4 Turn the jog dial to select “MASK” and then turn the shuttle dial clockwise
Page
Page
5POWER LOSS/USED TIME
6INITIALIZATION LOG
7COPY MENU SETTINGS
6 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise
Copying the recording area settings
8ADVANCED MENU SET
Setting the ROI
Page
Setting ROI area
15 Set the areas in frame 2 and frame 3 in the same way
17 Press the [EXIT/OSD] button
Confirming picture quality of ROI setting
Page
3 Turn the jog dial to select “3.CAMERA
CONTROL SET” and then turn the shuttle dial clockwise
7 Use the same procedure to set the connection channels of other dome cameras
15 Press the [EXIT/OSD] button
1 Press the [FUNC.] button (1)
2 Set the camera lens orientation
3 Press and hold the [PRESET] button (2) for about 3 seconds
For example, CH02 corresponds to PRESET
Operating the camera with the digital video recorder
Page
7 Turn the jog dial to select “ON” and then turn the shuttle dial clockwise
8 Set “NTP SERVER ADDRESS”
10 Set “TIME TO SYNCHRONIZE”
Example: 10:30
Page
Page
1GETTING PREPARED
Installing DVR Viewer2
Setting Internet Options
1 Select [Internet Options...] from the Internet Explorer [Tools] menu
Example: Windows XP
2 Click the [Security] tab
Minimum system requirements
Audio playback requirements
TCP/IP settings
1 Click the [Network and Internet
Connections] icon in the [Control
2NETWORK CONTROL
4 Select a language and click [OK]
1 Click the button on the operation screen of the PC
Display on the unit
When control rights are switched to the PC
When control rights are switched to the unit
Forced disconnection from the unit
Display on the PC
When disconnected from the network
When network settings are changed
Channel and screen selection buttons
1.Channel number
2.Channel selection (LV1/2/3/4)
3.Multi 9/16 screen display (LV1/2/3/4)
4.Quad-screendisplay (LV1/2/3/4) Click to display 4 screens
1 Click [CAMERA CONTROL]
2 Click each button to use a dome camera
2.Channel selection Select a camera channel
3.Pan/tilt
4.Menu set
Finishing dome camera operation
3 Click [CAMERA CONTROL]
1RECORDING IMAGES
2WATCHING IMAGES
Playback
Click the button
Adjusting the playback speed
During playback, click the or button
Reverse playback
Page
Page
1 Displays live image for users with download authorization
To cancel a save operation
Click [CANCEL]
3SEARCHING FOR RECORDED VIDEO
1 Click “1. ALARM LOG SEARCH” on the “SEARCH” screen
2 Set a time period for “TERM” and click the [MOVE] button
3 Set the date and time
4 Set “SEARCH” to the desired search mode
5 Click the [SEARCH] button
1 Click “2. ALARM SEARCH” on the “SEARCH” screen
3 Click the preview screen to play back the image
1 Click “3. ALARM THUMBNAIL SEARCH” on the “SEARCH” screen
2 Click the thumbnail for the image to be played back
1 Click “4. TIME/DATE SEARCH” on the “SEARCH” screen
2 Specify the camera number from the “CHANNEL” pull-downmenu
4 Click [PREVIEW]
5 Click the preview screen to play back the image
1 Click “5. ARCHIVE AREA SEARCH” on the “SEARCH” screen
1 Click “6. MOTION DETECTION SEARCH” on the “SEARCH” screen
2 Specify the search area from the “SEARCH FROM” pull-downmenu
SEARCH FROM
CHANNEL
(3) START/END
4SAVING (COPYING) RECORDED VIDEO
Play a recorded image
6 Specify copy range as numeric values according to the “UNIT” settings
7 Specify “COPY CH”
8 Click the [START] button
button on the operation
4 Set “UNIT”
5 Set “AUDIO”
6 Specify download range with numeric values depending on settings for “UNIT”
8 Set “DESTINATION FOLDER”
9 Click [START]
1SETTINGS
Page
2INITIAL SET
Setting the external clock
7 For “ADJUST TIME”, set the time at which the clocks are to be synchronized
8 Click [SAVE]
3 Click “3. HOLIDAY SET”
4 Specify the days to be treated as holidays
3RECORD SET
AREA FULL RESET
4 Click [AREA FULL RESET] under
“RECORDING AREA”
Setting overwriting permission for recording areas
3 Click “2. RECORDING CONDITIONS SET”
Setting the picture quality for recording
3 Click “3. NORMAL REC MODE SET”
4 Set “PICTURE QUALITY”
Setting audio recording
5 Set “AUDIO RECORDING” to “ON” or “OFF”
7 Set “REC PROGRAM GROUP” to the desired program group
3 Click “4. PROGRAM REC SET”
4 Set “PROGRAM” to the desired program group
6 Click [SAVE]
3 Click “5. TIMER SET”
4 Set timer recording conditions for different days of the week
(7) DLY
(8) EXT
Performing timer recording
Setting alarm recording
3 Click “6. ALARM REC MODE SET”
6 Set “AUDIO RECORDING”
Audio recording is enabled when “REC RATE (Step 8)” is
set to 1 FPS or more. ALL (P-1 – 4):
Audio recording is enabled when “REC RATE” for any one
of the program-registeredcameras is set to 1 FPS or more. ONLY (P-1 – 4):
Setting pre-alarmrecording
10 Set “PRE-ALARMRECORDING” to “ON” or “OFF”
11 Set “REC RATE” to the desired recording rate
12 Set “DURATION” to the desired pre- alarm recording duration
13 Set “ALARM TRIGGER” to the desired
4GENERAL SET
3 Click “3. SECURITY LOCK SET”
3 Click “4. USER ID SET”
4 Set user ID for “USER ID”
5 Set “PASSWORD”
6 Set user level for “LV”
3 Click “5. RS-485SET”
3 Click “6. HDD SET”
(1) Hard disk capacity
(2) MIRRORING
(3) PLAYBACK DRIVE
3 Click “7. NETWORK SET”
4 Change the settings as required
3 Click “8. NETWORK CONTROL SET”
6 Set “OPERATION AUTHORITY” to “NORMAL” or “CHANGE”
9 Click [SAVE]
5SCREEN SET
3 Click “2. MASK SET”
4 Set the following functions as required
6POWER LOSS/USED TIME
7INITIALIZATION LOG
8COPY MENU SETTINGS
9ADVANCED MENU SET
6 Set up “SMTP SERVER ADDRESS” and “PORT”
8 Specify “ON” or “OFF” for “USE” under
“SEND MAIL ADDRESS”
9 Enter the recipient’s e-mailaddress under “MAIL ADDRESS”
10 Set “IMAGE” to “ON” or “OFF”
3 Click “2. CAMERA CONTROL SET”
4 Set “PROTOCOL” to the protocol corresponding to the dome camera
5 The address (000 to 127) is displayed in “ADD”
7 Use the same procedure to set the other channels
8 Set “2ND RS-485/422PROTOCOL”
Set “NTP SERVER ADDRESS”
3 Click “4. TIME ZONE/NTP SET”
4 Set “TIME ZONE”
5 Set “SYNC. WITH NTP SERVER” to “ON”
1DVR VIEWER2
Initial screen
1Menu bar
1 File menu
Open:
Save:
1 Click in the toolbar
2 Click
3 Specify the folder in which the images are saved and click [OK]
4 Verify the displayed folder and click [OK]
5 Screen display
Toolbar
Full screen
Quad screen
9 screen
16 screen
(Viewer Operating Panel)
1 Playback slide bar
4 Audio adjusting section
2Operating buttons
3Playback speed adjusting section (Initial setting: 3)
Full screen display
Click in the toolbar or “Save” in the File menu
Click in the toolbar or click “Print” in the File menu
Click “Title Input” in the File menu
1Display format ( indicates default setting) To set the date display format
2INTERFACE SPECIFICATIONS
The table below shows the commands supported by the digital video recorder
3Specifications
Page
Example: Recording to a 300 GB hard disk; internal HDD 300GB*1 (99%-usage)
Example: Recording to a 500 GB hard disk; internal HDD 500GB*1 (99%-usage)
Page
Page
Page
Page
Page
4MENU SETTING SEQUENCE
Continued
GENERAL SET (→P.111)
SCREEN SET (→P.132)
DISPLAY SET (→P.112)
BUZZER SET (→P.114)
INITIALIZATION LOG (→P.140)
ADVANCED MENU SET (→P.144)
ROI SET (→P.145)
AREA SET (→P.147)
ALARM NOTICE SET (→P.149)
OpenSSL License
Page
INDEX
Setting the interval and monitors for automatic screen
User level
117, 131
Page
Printed in Japan