3GENERAL SET

Setting the buzzer

Use the following procedure to set a warning buzzer to sound for alarms or when hard disk space becomes insufficient.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “3.GENERAL

SET” and then turn the shuttle dial clockwise.

The <GENERAL SET> screen is displayed.

3 Turn the jog dial to select “2.BUZZER SET” and then turn the shuttle dial clockwise.

The <BUZZER SET> screen is displayed.

(1)

 

 

 

 

 

<BUZZER SET>

(2)

 

 

 

 

 

ALARM

: OFF

 

 

 

 

 

 

 

 

 

 

DISK FULL

: ON

 

 

 

 

 

(3)

 

 

 

 

 

DISK ERROR

: ON

 

 

 

 

 

 

 

 

 

 

LOCK WARNING

: ON

(4)

 

 

 

 

 

 

 

 

 

 

KEY IN

: OFF

(5)

 

 

 

 

 

NON REC

: OFF

 

 

 

 

 

 

 

 

 

 

 

 

zSetting is invalid when the hard disk is operated in a RAID unit.

zSelect “OFF” if you use hard disks other than those designated by SANYO, as this function may not properly work on them.

4 Turn the shuttle dial clockwise.

“OFF” flashes for “ALARM”.

<BUZZER SET>

ALARM

:

OFF

DISK FULL

:

ON

DISK ERROR

:

ON

LOCK WARNING

:

ON

KEY IN

:

OFF

NON REC

:

OFF

DISK TEMPERATURE:

ON

5 Turn the jog dial to select “ON” or “OFF” and then turn the shuttle dial clockwise.

The cursor moves to “DISK FULL”.

<BUZZER SET>

ALARM

:

ON

DISK FULL

:

ON

DISK ERROR

:

ON

LOCK WARNING

:

ON

KEY IN

:

OFF

NON REC

:

OFF

DISK TEMPERATURE:

ON

SETTINGS

(6)

(7)

DISK TEMPERATURE: ON

[Settings] (‹ indicates default setting)

Setting

Description

‹OFF

The buzzer does not sound when an alarm

occurs.

 

(1)ALARM (default setting: OFF) Sounds a buzzer when an alarm occurs.(2)DISK FULL (default setting: ON)

Sounds a buzzer when overwriting is not permitted and the hard disk capacity becomes insufficient.

(3) DISK ERROR (default setting: ON)

Sounds a buzzer accompanied with a warning message, when an abnormal condition has occurred in the hard disk drive.

(4) LOCK WARNING (default setting: ON)

Sounds a buzzer if a button is pressed while the security lock is on. Specifically, the buzzer sounds twice with an interval of approximately 0.5 seconds.

(5)KEY IN (default setting: OFF) Sounds a buzzer when a button is pressed.(6)NON REC (default setting: OFF) Sounds a buzzer when recording is stopped.

(7)DISK TEMPERATURE (default setting: ON) Sounds a buzzer accompanied with a warning message, when the temperature has exceeded a given value in the hard disk drive.

ON

The buzzer sounds when an alarm occurs.

6 Use the same procedure to set the other items to “ON” or “OFF”.

7 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

zTo stop a buzzer, press any button or turn either the jog dial or shuttle dial.

114

English