Sanyo DSR-5709P 4SAVING (COPYING) RECORDED VIDEO, (2), (1), (3), (10), panel, (11)(12), 3 Click the, NETWORK OPERATION, button on the control, 5 Specify for “AUDIO”

4SAVING (COPYING) RECORDED VIDEO

Use the following procedures to copy recorded images to the archive area on the hard disk or to download images to a PC or the like.

These functions can be used to save important images from the recording areas.

zIn certain cases where network-busy is detected as a result of the operating environment, the network may be forcibly disconnected in order to protect DVR recording operations. Furthermore, the network is forcibly disconnected in response to commands to send a large amount of data in a single operation (in particular, when 100 images or more are to be saved), and in this case, the number of images should be limited based on the hardware configuration in question.

zWhen the archive area becomes full of images, download these images to a USB memory or other storage media and click [AREA FULL RESET] from the recording area settings on the “MAIN MENU”. (JP.187)

zCan only save in full screen display. Cannot save for quad- screen or multi screen display.

zCopied data is stored one image at a time. Moving images can be copied by setting the number of images required from the first copied image.

Copying to the archive area

(2)

(1)

(3)
		(7)	(8)
(4)
	(5)
(6)
	(9)
(10)

(11)(12)

(1)Recording date and time of the video that is being played back.

(2)PLAYBACK AREA: Type of video recording that is being played back.

z ALARM z PRE ALARM z NORMAL z ARCHIVE

(3)MESSAGE: Displays a message when starting copy.

(Example: PLEASE WAIT!)

(4)UNIT: Select a method to specify the copy range (number of pictures, time and events).

(5)AUDIO: Specify whether or not to copy audio.

(6)PICTURES (1-40000): Specify the number of sheets when “PICTURES” is specified in “UNIT”.

(7)TIME: Specify hours, minutes and seconds when “TIME” is specified in “UNIT”.

(8)EVNETS: Enter the number of events when “EVENT” is specified in “UNIT”.

(9)COPY CH: Select a channel to copy.

(10)COPY TO: Fixed to “ARCHIVE AREA” (not selectable).

(11)[START] button: Starts copying.

(12)[CANCEL] button: Aborts copy.

1 Play back video stored in the recording area.2 Click the button on the control panel at the start of the video being copied.

Video stops to provide a still picture.

3 Click the	button on the control
panel.

The “COPY” screen is displayed.

4 Specify a value for “UNIT”.

[Settings] (‹ indicates default setting)

	Setting	Description
‹PICTURES		Specifies the copy range as the number of
		pictures.
	TIME	Specifies the copy range as time (hours/
		minutes/seconds).
	EVENTS	Specifies the copy range as the number of
		events.

zAn event means a continuous record (or a recording unit set by “DURATION” for the alarm recording).

zYou can select “EVENTS” only when copying alarm recording video.

5 Specify for “AUDIO”.

[Settings] (‹ indicates default setting)

Setting	Description
‹ON	Also copies audio.
OFF	Does not copy audio.

NETWORK OPERATION

180 English