ANTENNA CONNECTIONS

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page E40 for “CATV CONNECTIONS”.

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

75 ohm Coaxial Cable

or

Antenna Plug (supplied)

Connect the 75 ohm Cable from the Combina- tion VHF/UHF Antenna to Antenna Plug (sup- plied) first, then attach the plug to the Antenna Jack.

If your Combination VHF/UHF Antenna has a

300ohm Twin-lead Wire, the use of the 300-75 ohm Matching Transformer may be neces- sary.

300-75 ohm Matching

Antenna

Transformer

Jack

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)

 

Antenna Plug (supplied)

300-75 ohm

 

Matching

 

 

 

 

Transformer

 

Combiner

 

Antenna

UHF 300 ohm

 

Jack

 

Connect the UHF 300 ohm Twin-lead Wire to the Combiner (not supplied). Connect the VHF

300ohm Twin-lead Wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to Antenna Plug (supplied), then attach the plug to the Antenna Jack.

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)

 

Connect the VHF 75 ohm cable and UHF 300

 

ohm Twin-lead Wire to the Combiner. Attach

 

the Combiner to Antenna Plug (supplied) first,

Antenna Plug (supplied)

then attach the plug to the Antenna Jack.

 

VHF 75 ohm

Combiner

 

Antenna

 

Jack

 

UHF 300 ohm

 

Adjusting the Rod Antenna

Rod antenna

You can get a stable image by adjusting the orientation and length of the rod antenna.

-E39-

Page 39
Image 39
Sanyo DVD-L70 instruction manual Antenna Connections, Adjusting the Rod Antenna, Ohm Twin-lead Wire to the Combiner. Attach