5 Press the SET button.

œThe Clipping Screen appears.

œ“CLIP FORMER” is selected initially.

6 Press j orl on the arrow button to select the portion of the video clip to be saved.

To save the beginning portion:“CLIP FORMER”Select

To save the ending portion: Select “CLIP LATTER”

ÄCLIP FORMER CLIP LATTER EXIT

28/08/2001

19:00 100-0003

Clipping Screen

7 Press the SET button.

œ The Erase Original Confirmation Screen appears.

ERASE ORIGINAL?

8 Pressj orl on the arrow button to select whether YES or not to erase the original video clip when the newÄNO one is saved.

28/08/2001

To erase the original video“YES”clip: Select 19:00 100-0003

To not erase the original video clip: Select “NO”

EraseHOriginalHConfirmatio

9 Press the SET button.

œ“PROCESSING” and then “LOADING” are displayed,

and then you return to the Edit Video Clip Screen.

œ The selected portion of the video clip is saved asPROCESSINGa separate video clip.

œ If“YES” was selected at step 8, the original video clip

 

 

 

 

28/08/2001

 

is erased as the selected portion is saved.

 

19:00 100-0003

 

œTo return to the Playback Setting Screen, press the MODE button, or select“EXIT” and press the SET

button.

HELP

If “ DISK FULL” appears

œThis indicates that there is not enough available space on the disk to save the For more information, refer“Concerningto video clip editing” on page 136.

If “ BATTERY EMPTY” appears

œVideo clip editing cannot be performed because the remaining charge in the bat low. Recharge the battery pack, replace it with a charged battery pack, or conn adapter/charger and then perform the video clip editing.

NOTE

œEven if you select“YES” at step 8 and press the SET button, the original video clip will not be erased. If you want it to be erased if it is being protected, you need to first remove the protection (see page 152).

EnglishH138