Using the AC power supply
Use the supplied AC adapter/charger to operate the digital disk camera with an AC power supply (by connecting to a power outlet).
Caution
œThe AC adapter/charger is for exclusive use with this digital disk camera
œIf the AC ADAPTER lamp is flashing, there is likely a problem with the AC adapter/charger. If it is flashing, immediately unplug the power cord from the power outlet and contact the place of purchase (see page 26).
1 Insert the supplied power cord into the socket on the AC adapter/charger.
œInsert the power cord straight and until it is fully seated.
2 Plug the DC cord into the DC IN terminal on the digital disk camera.
3 Plug the power cord into a power outlet (AC 100 to 240 V).
4 Turn on the digital disk camera (see page 32).
œWhen the digital disk camera is turned on, the green AC ADAPTER lamp turns on.
œIf charging is being performed at this time, charging is stopped automatically and AC power is supplied to the digital disk camera. (The red BATTERY CHARGE lamp turns off and the green AC ADAPTER lamp turns on.)
BATTERY CHARGE lamp (red)
AC ADAPTER lamp (green)
To AC
Power cord
AC adapter/ charger
Power button
DC cord
DC plug
DC IN terminal
Terminal cover
29English