Turning off the digital disk camera
1 Press the power button for more than one second.
œThe digital disk camera does not turn off right away to prevent it from being turned off accidentally.
œWhen the power is turned off, the displays on the mode display panel and LCD monitor (or viewfinder) turn off.
Mode display panel
Power button
Viewfinder
LCD monitor
Turning on the digital disk camera from the power save mode
In order to prevent the battery pack from being used when not necessary, if the power is turned on and no operation is performed for a certain amount of time (three minutes in the shooting mode, five minutes in the playback mode, and thirty minutes when the AC adapter/charger is connected), your digital disk camera is equipped with a power save function that activates and automatically puts the digital disk camera in the power save mode. However, if the remote control menu (see page 124) at the Option Screen is set to D(not using remote control), the digital disk camera will be turned off without going into the power save mode.
About the power save mode
When the digital disk camera enters the power save mode, “SLEEP” appears in the mode display panel.
œ The power can be turned back on with the remote control when in the power save mode.
œIf the power save mode is continued for two
hours, the power is turned completely off.
œIf the disk is ejected in the power save mode, the power is turned off automatically.
Mode display panel
Turning the power back on
1 Press the shutter release button or power button. | Shutter release |
Power button | button |
œ This method is the same for the shooting and playback modes.
NOTE
œYou can connect the digital disk camera to your personal computer and set the time before the power save function activates to the time you desire. For more details, refer to the instruction manual supplied with the SANYO Software Pack.
35English