POWER SUPPLY

Use only the UR-121 battery pack with your digital disk camera. To operate the digital disk camera using a power outlet, use the supplied AC adapter/charger.

Your digital disk camera can be operated using two different types of power supplies:

œThe supplied battery pack [pages 24 to 28]

œThe supplied AC adapter/charger (using the AC power supply from an AC power outlet) [page 29]

Caution

œUse only the supplied or separately sold UR-121 battery pack. Use of another battery pack may damage the digital disk camera.

œThe supplied or separately sold UR-121 battery pack is for the exclusive use with this digital disk camera. Use with a different camera may cause a fire or electric shock.

Installing the clock backup battery

Follow the procedure below to install the battery for backing up the date and time settings, various camera settings, and other disk information. The backup lithium battery will last approximately one year and then will require replacement (one CR2025 battery).

1 Open the battery pack cover.

1Press and hold down the BATT knob on the digital disk camera bottom.

2Pull the battery pack cover toward the front of the digital disk camera and then lift it up.

1

2

2 Open the clock backup battery cover and install the clock backup battery.

œThe clock backup battery (CR2025) is installed in the bottom of the section for the battery pack.

œWipe the battery clean with a soft, dry cloth and then install it with the positive

(+) terminal facing upward.

Installation Removal

Clock backup battery cover

NOTE

Saving the camera settings

œWhether a fully charged battery pack is installed, a clock backup battery is installed, or AC

power is used with the AC adapter/charger, the manual mode settings and other camera settings will be saved even when the digital disk camera is turned off. However, when cis selected at the hold settings menu, the settings are not saved and are returned to their initial settings (see page 112).

23English