The BATTERY CHARGE and AC ADAPTER lamps
The BATTERY CHARGE and AC ADAPTER lamps allow you to check the condition of the battery pack and AC adapter/charger. If either of the lamps begins flashing, it indicates a problem. Refer to the table below to check and remedy the problem.
BATTERY | Off | Power is not being supplied |
CHARGE lamp |
| œ Plug the power cord into a power outlet when using |
|
| the AC adapter/charger. |
|
| Charging is complete |
|
| œ Unplug the power cord from the power outlet. |
| On | Charging |
| Flashing | There is a problem with the battery pack |
|
| œ Immediately remove the battery pack. |
|
| œ Do not use a malfunctioning battery pack (the |
|
| battery pack has likely ended its usable life). |
AC ADAPTER | Off | The AC adapter/charger is not connected properly |
lamp |
| œ When running the digital disk camera with the AC |
|
| power supply, plug one end of the power cord into |
|
| power outlet and the other into the power supply |
|
| socket on the AC adapter/charger, and plug the DC |
|
| cord into the DC IN terminal on the digital disk |
|
| camera. |
|
| The digital disk camera is not turned on |
|
| œ Press the power button to turn on the digital disk |
|
| camera. |
| On | AC power is being supplied to the digital disk camera |
| Flashing | There is a problem with the AC adapter/charger |
|
| œ Immediately unplug the power cord from the power |
|
| outlet. |
|
| œ Do not charge the battery pack. |
|
| œ Contact the place of purchase. |
|
|
|
HELP |
|
|
If the BATTERY CHARGE lamp does not turn off
œIf more than 150 minutes have elapsed since charging was begun and the BATTERY CHARGE lamp does not turn off, there is a malfunction. If this occurs, immediately stop charging and contact the place of purchase.
English 26