USING WITH A COMPUTER SYSTEM
By connecting your digital disk camera to a computer, you can greatly expand the uses available with your digital disk camera.
Connecting to your computer
Your digital disk camera is equipped with a USB terminal and an IEEE1394 terminal for connecting the digital disk camera to a computer. By installing the software included in the SANYO Software Pack, you can download and edit files saved in your digital disk camera, operate your digital disk camera from your computer, and much more. (For using the different interfaces, the driver software for the interface is required.)
Connecting to the USB terminal
Mode selector dial
| Interface cover |
To USB port | To USB terminal |
USB computer interface cable (supplied)
œBy connecting to a computer using the USB terminal, you can use the software included in the SANYO Software Pack to download data from the disk in the digital disk camera the computer and operate the digital disk camera remotely from the computer.
œ When the mode selector dialéis setandto the USB 
panel.
Display when USB connection is made
NOTE
œWhen the digital disk camera is connected to a computer, the monitor of the dig turns off and all control except for the power button and mode selector dial b
159English