Removing the battery pack
Caution
œBefore removing the battery pack, be sure to turn off the digital disk camera. Removing the battery pack while the power is still on may damage the digital disk camera or data on the disk.
1 If the digital disk camera is turned on, turn it off (see page 35).
œPress the power button for more than one second.
œWhen the power is turned off, the displays on the mode display panel and LCD monitor (or viewfinder) turn off.
Mode display panel Power button
Viewfinder
LCD monitor
2 Open the battery pack cover.
1Press and hold down the BATT knob on the digital disk camera bottom.
2Pull the battery pack cover toward the front of the digital disk camera and then lift it up.
Battery pack cover
1
2
3 Remove the battery pack.
œSlide the battery pack toward the front of the digital disk camera and lift it upward. (Be careful not to drop the battery pack when removing it.)
œImmediately after use, wait a few minutes before removing the battery pack because it may still be hot.
4 Close the battery pack cover.
English 28