3 Press c on the arrow button to select the AE shift icon <.
AE shift sequential shot: Select <
Normal sequential shot: Select U
œ If the exposure control setting (see page 92) is set to a |
|
|
|
|
setting other than program AE, then the AE shift icon |
|
|
|
|
<cannot be selected. For the AE shift sequential |
|
|
|
|
|
| |||
shot, change the exposure control setting to program |
|
| ||
|
|
|
| |
AE (see page 94). |
|
|
|
|
4 Press the SET button.
œThis completes the AE shift sequential shot setting.
œThe AE shift sequential shot setting returns to the normal sequential shot if the mode selector dial is turned, the CAMERA/PLAY switch is changed, or the digital disk camera is turned off.
œTo exit the Shooting Setting Screen, press the MODE button.
5 Press the shutter release button. |
| Recording mark | |||||
œ The AE shift sequential shot is taken. |
|
|
|
|
|
|
|
1 / | 4 3 |
|
|
|
|
| |
|
|
|
|
| |||
|
|
|
|
|
| ||
œ While the AE shift sequential shot images are being | 4 . | 1 |
|
|
|
|
|
captured, the bicon will appear in the monitor. |
|
|
|
|
|
|
|
œEven after the AE shift sequential shot is finished, the AE shift sequential shot setting remains unchanged.
NOTE
œFor the AE shift sequential shot, even if you have set the exposure correction (see page 87), the exposure correction value is returned to á0 and then the AE shift sequential shot is captured.
œFor the sequential shot shooting mode, the Ycompression ratio cannot be set.
About the sequential shot speed
œThe sequential shot speed for sequential shots depends on the resolution. Resolution R: 7.5 images/second (approx. 0.13 seconds/image) Resolution Q: 7.5 images/second (approx. 0.13 seconds/image) Resolution P: 30 images/second (approx. 0.03 seconds/image)
HELP
If the exposure does not change
œIf the subject is too bright or too dark, the exposure may not change as required.
83English