Using the self-timer

The self-timer function allows you to have the digital disk camera wait 10 seconds after the shutter release button is pressed until it captures the image or starts recording. You can also change the amount of time the digital disk camera will wait from anywhere between 0 seconds to 9 hours 59 minutes 59 seconds.

*When using the self-timer, be sure to use a tripod or other means of holding the digital disk camera.

Preparation

œ Set the CAMERA/PLAY “CAMERAswitch.” to

œ Turn the mode selector&,r,dial7orto select the d

1 Press the MODE button.

œ The Shooting Setting Screen appears

2 Press j or l on the arrow button to select the

self-timer menu.

Ä0:00:10

 

œ The self-timer menu appears.

100-0003

Timer-menu

Shooting-Setting-Scre

3 Press c on the arrow button to select the self-timer icon v.

œTo set the self-timer:v (selfSel ct -timer on)

œTo not set the selfw-timer:(selfS ect -timer off)

4 Press the SET button.

Ä0:00:10

œThis completes the self-timer setting. 100-0003

œThe timer#markand the time until ima captured or recording is sta display panel.

œThe default time for the self-timer is 10 seconds. If you

will not change this setting,6.skip to step

œIf you want to change the time for the self-timer,

proceed to5. step

œ The self-timer setting returns to self-timer off and the self-timer time returns to 10 seconds if the mode

selector dial is turned, or the digital disk camera is Time-until-image-

turned off.captured-or- recording-started

Timer-mark

Mode-display-panel

English80-