Using the Still and Video Camera

Using the Still and Video Camera

Tip: If you press and hold O to save a photo in step 4 above, the folder selection window appears, and you can select the Picture folder or another folder if you have created one. (See p. 82.)

Sending a photo attached to a Picture Message or an Email before saving it

As soon as you have taken a photo you can attach it to a Picture Message or an Email.

1Press [Send] after taking the photo.

2Select Attach to Message and press O.

3Select the message type and press O. The display turns into a message creation screen.

Sending a photo via Bluetooth or Infrared

Before using this function, be sure to activate reception mode on the receiving device. (When you are using an S750i as the other receiving device, see pp. 172 when using Bluetooth and 181 when using infrared to receive data.)

Refer to “Cautions” for infrared transmission (See p. 179.)

1Press [Send] after taking the photo.

2Bluetooth transmission: Select Send via Bluetooth Press O Press

[Search] Follow the procedures from step 7 on page 169.

Infrared transmission: Select Send via Infrared Press O

3Select Save and press O on the receiving device.

Taking Continuous-frame photos (for still camera only)

This feature is not available for image sizes VGA and SXGA. The number of shots can be selected from 16 or 9.

For 9 shots, there are 3 levels of continuous-frame shooting speeds.

1Press [Options] while focused on a subject, select Continuous and press O.

2Select the number of shot combinations and continuous- frame shooting speeds from 16 Shots, 9 Shots (Fast), 9 Shots (Mid), and 9 Shots (Slow). The display changes to a viewfinder.

3Press O to take the photos. After all the photos are processed, they are displayed in a thumbnail format.

4Press [Save All] to save.

To select and save a photo from the continuous-frame taken photos

If you want to only select a specific photo to save, select the desired thumbnail photo after taking the continuous frame photos and press O before pressing [Save All]. The selected photo is displayed enlarged. Use l / r (or n or ;) from this display to view the other continuous frame photos taken. Press O again to save the displayed photo.

Note: Soft key indicators are removed from the display if that photo is saved so that you can tell which photos are already saved.

To save all the photos in one file

You can save continuous-frame taken photos in thumbnail form in one file. This enables you to view all the continuous-frame photos at once.

40

41

Page 20
Image 20
Sanyo S750i manual Sending a photo via Bluetooth or Infrared, Taking Continuous-frame photos for still camera only